T-55468D104J-FW-A-AAN Optrex America Inc, T-55468D104J-FW-A-AAN Datasheet - Page 24

• Manufacturer Part Number: T-55468D104J-FW-A-AAN
• Description: LCD 10.4" TFT MOD 1024X768 XGA
• Manufacturer: Optrex America Inc

Specifications of T-55468D104J-FW-A-AAN

• Display Type: TFT- Thin Film Transistor
• Display Mode: Passive
• Viewing Area: *
• Dot Size: *
• Dot Pitch: *
• Dot Pixels: 1024 x 768 (XGA)
• Interface: LVDS
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Backlight: -
• Lead Free Status / Rohs Status: Details

(2) OPERATING PRECAUTIONS
(3) PRECAUTIONS WITH ELECTROSTATICS
(4) STORAGE PRECAUTIONS
(5) SAFETY PRECAUTIONS
OPTREX
k. Be sure to connect the cables and the connectors correctly.
a. Please be sure to turn off the power supply before connecting and disconnecting signal input
b. Please do not change variable resistance settings in LCD module. They are adjusted to the most
c. LCD backlight takes longer time to become stable of radiation characteristics in low
d. The interface signal speed is very high. Please pay attention to transmission line design and
e. A condensation might happen on the surface and inside of LCD module in case of sudden
f. Please pay attention not to display the same pattern for very long time. Image might stick on
g. Please obey the same safe instructions as ones being prepared for ordinary electronic products.
b. Please remove protection film very slowly from the surface of LCD module to prevent from
a. When you waste damaged or unnecessary LCDs, it is recommended to crush LCDs into pieces
b. If any liquid leaks out of a damaged glass cell and comes in contact with the hands, wash off
c. Be sure to turn off the power supply when inserting or disconnecting the cable.
a. This LCD module use CMOS-IC on circuit board and TFT-LCD panel, and so it is easy to be
cable.
suitable value. If they are changed, it might happen LCD does not satisfy the characteristics
specification.
temperature than in room temperature.
other high speed signal precautions to satisfy signal specification.
change of ambient temperature. Please take care so as not to cause any damage mentioned on
(1)-e.
LCD. Even if image sticking happens, it may disappear as the operation time proceeds.
affected by electrostatics. Please be careful with electrostatics by the way of your body
connecting to the ground and so on.
electrostatics occurrence.
inventory should be processed by first-in first-out method.
and wash them off with solvents such as acetone and ethanol, which should later be burned.
thoroughly with soap and water.
LCD should be stored in the room temperature environment with normal humidity. The LCD
Confidential
(24/25)
T-55468D104J-FW-A-AAN