NHD-1.8-128160YF-CTXI# Newhaven Display, NHD-1.8-128160YF-CTXI# Datasheet - Page 14

• Manufacturer Part Number: NHD-1.8-128160YF-CTXI#
• Description: LCD DISPLAY TFT 1.8" 128X160 WHT
• Manufacturer: Newhaven Display

Specifications of NHD-1.8-128160YF-CTXI#

• Display Type: TFT - Color LCD
• Display Mode: Transmissive
• Viewing Area: 35.04mm L x 28.03mm W
• Backlight: LED - White
• Dot Size: 0.22mm W x 0.22mm H
• Dot Pixels: 160 x 128
• Module Size (w X H X T): 34 mm x 47 mm x 2.4 mm
• Backlighting: White
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Interface: -
• Dot Pitch: -
• Lead Free Status / Rohs Status: Details

7.10 General appearance
7.8 Backlight elements
7.9 Soldering
5. The uppermost edge of the protective strip on the interface pin must be present or look as if it
6. The residual rosin or tin oil of soldering (component or chip component) is not burned into
1. Illumination source flickers when lit.
2. Spots or scratches that appear when lit must be judged using LCD spot, lines and
contamination standards.
3. Backlight doesn’t light or color is wrong
1. No unmelted solder paste may be present on the PCB.
2. No cold solder joints, missing solder connections, oxidation or icicle.
3. No residue or solder balls on PCB.
4. No short circuits in components on PCB.
1. No oxidation, contamination, curves or, bends on interface pin (OLB) of TCP.
2. No cracks on interface pin (OLB) of TCP
3. NO contamination, solder residue or solder balls on product.
4. The IC on the TCP may not be damaged, circuits.
7. Sealant on top of the ITO circuit has not hardened
8. Pin type must match type in specification sheet.
9. LCD pin loose or missing pins.
10. Product packaging must the same as specified on packaging specification sheet.
11. Product dimension and structure must conform to product specification sheet.
12. The appearance of Heat Seal should not admit any dirt and break.
cause the interface pin to sever.
brown or black color.