NHD-1.8-128160YF-CTXI# Newhaven Display, NHD-1.8-128160YF-CTXI# Datasheet - Page 17

• Manufacturer Part Number: NHD-1.8-128160YF-CTXI#
• Description: LCD DISPLAY TFT 1.8" 128X160 WHT
• Manufacturer: Newhaven Display

Specifications of NHD-1.8-128160YF-CTXI#

• Display Type: TFT - Color LCD
• Display Mode: Transmissive
• Viewing Area: 35.04mm L x 28.03mm W
• Backlight: LED - White
• Dot Size: 0.22mm W x 0.22mm H
• Dot Pixels: 160 x 128
• Module Size (w X H X T): 34 mm x 47 mm x 2.4 mm
• Backlighting: White
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Interface: -
• Dot Pitch: -
• Lead Free Status / Rohs Status: Details

accelerated by water droplets, moisture condensation or a current flow in a high-humidity
environment.
make sure it is free of twisting, warping and distortion. In particular, do not forcibly pull or bend
the IO cable or the backlight cable.
optimum work environment.
work under dry conditions.
peeling off this protective film since static electricity may be generated.
lamps. Keep the modules in bags (avoid high temperature high humidity and low temperatures
below 0 C). Whenever possible, the LCD modules should be stored in the same conditions in
which they were shipped from our company.
to defective orientation or the generation of air bubbles (black or white). Air bubbles may also be
generated if the module is subject to a low temperature.
the display patterns may remain on the screen as ghost images and a slight contrast irregularity
may also appear. A normal operating status can be regained by suspending use for some time. It
should be noted that this phenomenon does not adversely affect performance reliability.
caused by static electricity etc., exercise care to avoid holding the following sections when
handling the modules.
Storage Precautions
Others
When storing the LCD modules, avoid exposure to direct sunlight or to the light of fluorescent
Liquid crystals solidify under low temperature (below the storage temperature range) leading
If the LCD modules have been operating for a long time showing the same display patterns,
To minimize the performance degradation of the LCD modules resulting from destruction
- Ketone
- Aromatic solvents
(7) Exercise care to minimize corrosion of the electrode. Corrosion of the electrodes is
(8) Install the LCD Module by using the mounting holes. When mounting the LCD module
(9) Do not attempt to disassemble or process the LCD module.
(10) NC terminal should be open. Do not connect anything.
(11) If the logic circuit power is off, do not apply the input signals.
(12) To prevent destruction of the elements by static electricity, be careful to maintain an
- Be sure to ground the body when handling the LCD modules.
- Tools required for assembling, such as soldering irons, must be properly grounded.
- To reduce the amount of static electricity generated, do not conduct assembling and other
- Exposed area of the printed circuit board.
- Terminal electrode sections.
- The LCD module is coated with a film to protect the display surface. Exercise care when