HCMS-2976 Avago Technologies US Inc., HCMS-2976 Datasheet - Page 5
![LED DISPLAY 5X7 8CHAR 5MM BLUE](/photos/22/51/225177/2210347_sml.jpg)
HCMS-2976
Manufacturer Part Number
HCMS-2976
Description
LED DISPLAY 5X7 8CHAR 5MM BLUE
Manufacturer
Avago Technologies US Inc.
Series
HCMS-29xxr
Specifications of HCMS-2976
Millicandela Rating
*
Internal Connection
*
Size / Dimension
1.69" L x 0.45" W x 0.21" H (42.93mm x 11.43mm x 5.33mm)
Color
Blue
Configuration
*
Voltage - Forward (vf) Typ
*
Package / Case
26-DIP
Display Type
Alphanumeric
Number Of Digits/alpha
8
Digit/alpha Size
0.20" (5mm)
Character Format
Dot Matrix
Character Size
5.08mm
Led Color
Blue
Luminous Intensity
170µcd
No. Of Digits / Alpha
8
Display Area Width
42.93mm
Display Area Height
11.43mm
Number Of Digits
8
Illumination Color
Blue
Wavelength
460 nm
Operating Voltage
5.5 V
Maximum Operating Temperature
+ 85 C
Minimum Operating Temperature
- 40 C
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Common Pin
-
Lead Free Status / Rohs Status
Details
Electrical Description
Pin Function Description
5
RESET (RST)
DATA IN (D
DATA OUT (D
CLOCK (CLK)
REGISTER SELECT (RS)
CHIP ENABLE (CE)
OSCILLATOR SELECT
OSCILLATOR (OSC)
BLANK (BL)
GND
GND
V
V
LED
LOGIC
LED
LOGIC
IN
)
OUT
)
Reset pin. (logic low = reset; logic high = normal operation)
multiple displays.
Clock input for writing Dot or Control Register data. When Chip Enable is logic low, data
is entered on the rising Clock edge.
Chip Enable input.
Display Oscillator; logic high = Internal Display Oscillator).
Output for the Internal Display Oscillator (SEL = logic high) or input for an External
Display Oscillator (SEL = logic low).
Blanks the display when logic high. May be modulated for brightness control.
Ground for LED drivers
Ground for logic.
Positive supply for LED drivers
Positive supply for logic.
Sets Control Register bits to logic low. The Dot Register contents are unaffected by the
Serial Data input for Dot or Control Register data. Data is entered on the rising edge of
the Clock input.
Serial Data out put for Dot or Control Register data. This pin is used for cascading
Selects Dot Register (RS = logic low) or Control Register (RS = logic high) as the
destination for serial data entry. The logic level of RS is latched on the falling edge of the
This input must be a logic low to write data to the display. When CE returns to logic high
and CLK is logic low, data is latched to either the LED output drivers or a Control Register.
Selects either an internal or external display oscillator source. (SEL) (logic low = External