M0216SD-162SDAR8 Newhaven Display, M0216SD-162SDAR8 Datasheet - Page 22

MODULE VF CHAR 2X16 5.34MM

M0216SD-162SDAR8

Manufacturer Part Number
M0216SD-162SDAR8
Description
MODULE VF CHAR 2X16 5.34MM
Manufacturer
Newhaven Display
Datasheet

Specifications of M0216SD-162SDAR8

Outline L X W X H
84.00mm x 44.00mm x 16.60mm
Display Format
16 x 2
Display Type
Character
Format
5 x 8 Dots
Voltage - Supply
5V
Character Size
5.34mm H x 2.10mm W
Operating Temperature
-40°C ~ 85°C
Product
Character Display Modules
Character Count X Line
16 x 2
Module Size (w X H X T)
84 mm x 44 mm x 16.6 mm
Voltage Rating
5 V
Operating Temperature Range
- 40 C to + 85 C
Dot Format
5 x 7
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Interface
-
Viewing Area
-
Number Of Dots
-
Lead Free Status / Rohs Status
 Details
STANDARD
NAME
6.5.9 ADDRESS COUNTER READ
This instruction reads the current 7-bit address from the AC on DB6-DB0 and the busy flag (BF) bit
(always 0) on DB7. DDRAM, CGRAM, and AC contents are not affected by this instruction. Because
the BF is always 0, the host never has to read the BF bit to determine if the modules are busy before
sending data or instructions. Therefore, data and instructions can be sent to the modules continuously
according to the E, WR/, and SCK cycle times specified in section 3.7 AC Timing Specifications. Due
to this feature, the execution times for each instruction are not specified.
6.5.10 DDRAM OR CGRAM WRITE
This instruction writes the 8-bit data byte on DB7-DB0 into the DDRAM or CGRAM location
addressed by the AC. The most recent DDRAM or CGRAM Address Set instruction determines
whether the write is to DDRAM or CGRAM. This instruction also increments or decrements the AC
and shifts the display according to the I/D and S bits set by the Entry Mode Set instruction.
6.5.11 DDRAM OR CGRAM READ
This instruction reads the 8-bit data byte from the DDRAM or CGRAM location addressed by the AC
on DB7-DB0. The most recent DDRAM or CGRAM Address Set instruction determines whether the
read is from DDRAM or CGRAM. This instruction also increments or decrements the AC and shifts
the display according to the I/D and S bits set by the Entry Mode Set instruction. Before sending this
instruction, a DDRAM or CGRAM Address Set instruction should be executed to set the AC to the
desired DDRAM or CGRAM address to be read.
SPECIFICATION FOR APPROVAL
RS
RS
RS
0
1
1
R/W DB7 DB6 DB5 DB4 DB3 DB2 DB1 DB0
R/W DB7 DB6 DB5 DB4 DB3 DB2 DB1 DB0
R/W DB7 DB6 DB5 DB4 DB3 DB2 DB1 DB0
1
0
1
BF=0
Write data
Read data
AC contents
DOCUMENT NO.
M0216SD-162SDAR8
REV. NO.
00
PAGE
22/24

Related parts for M0216SD-162SDAR8