HFBR-2506AMZ Avago Technologies US Inc., HFBR-2506AMZ Datasheet - Page 2

• Manufacturer Part Number: HFBR-2506AMZ
• Description: RCVR OPTICAL 16MBD SERCOS SMA
• Manufacturer: Avago Technologies US Inc.

Specifications of HFBR-2506AMZ

• Data Rate: 16MBd
• Voltage - Supply: 4.75 V ~ 5.25 V
• Current - Supply: 27mA
• Applications: General Purpose
• Data Rate Max: 0.016Gbps
• Data Transmission Distance: 200m
• Wavelength Typ: 650nm
• Length/height, External: 10.2mm
• Peak Reflow Compatible (260 C): Yes
• External Width: 12.6mm
• External Depth: 16.1mm
• Connector Type: SMA
• Leaded Process Compatible: Yes
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Power - Minimum Receivable: -
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant

Package Information
The RoHS-compliant transmitters and receivers are
housed in a low-cost, dual-in-line package that is made
of high strength, heat resistant, chemically resistant and
UL 94V-O (UL file # E121562) flame retardant plastic.
Both the transmitter and receiver are coated with a layer
of conductive alloy for better air discharge (ESD) perfor-
mance. The package is designed for auto insertion and
wave soldering so it is ideal for high volume production
applications.
Handling and Design Information
When soldering, it is advisable to leave the protective
cap on the unit to keep the optics clean. Good system
performance requires clean port optics and cable ferrules
to avoid obstructing the optical path. Clean compressed
air often is sufficient to remove particles of dirt; methanol
on a cotton swab also works well.
Link Performance Specification
0 °C to +70 °C unless otherwise noted.
Notes:
1. 60 mA nominal drive current.
2. POF HFBR-ExxyyyZ 0.23 dB/m worst case attenuation.
3. HCS 10 dB/km worst case attenuation.
4. Including a 3 dB optical safety margin accounting for link service lifetime.
5. Including a 2 dB optical safety margin accounting for link service lifetime.
6. Signaling rate dc to 16 MBd.
2
Parameter
Link distance with HFBR-1506AMZ/2506AMZ
CAUTION: The small junction size inherent in the design of these components increases the components’ susceptibility to damage from elec-
trostatic discharge (ESD). It is advised that normal static precautions be taken in handling and assembly of these components to prevent
damage and/or degradation which may be induced by ESD.
Symbol
I
Min
0.1
0.1
Recommended Chemicals for Cleaning/Degreasing
Alcohols: methyl, isopropyl, isobutyl.
Aliphatics: hexane, heptane.
Other: soap solution, naphtha.
Do not use partially halogenated hydrocarbons such as
1,1,1 trichloroethane, ketones such as MEK, acetone,
chloroform, ethyl acetate, methylene dichloride, phenol,
methylene chloride or N-methylpyrolldone. Also, Avago
Technologies does not recommend the use of cleaners
that use halogenated hydrocarbons because of their
potential environmental harm.
Max
45
200
Unit
m
m
Condition
POF
HCS
Reference
Note 1, 2, 4, 6
Note 1, 3, 5, 6