AFBR-5903AZ Avago Technologies US Inc., AFBR-5903AZ Datasheet - Page 9

• Manufacturer Part Number: AFBR-5903AZ
• Description: TXRX OPT FE MTRJ EXT TEMP 2X5DIP
• Manufacturer: Avago Technologies US Inc.

Specifications of AFBR-5903AZ

• Data Rate: 100Mbps
• Wavelength: 1300nm
• Applications: General Purpose
• Voltage - Supply: 3.3V
• Connector Type: MTRJ
• Mounting Type: Through Hole
• Function: Implement FDDI and ATM at the 100 Mbps/125 MBd rate
• Product: Transceiver
• Maximum Rise Time: 3 ns/2.2 ns
• Maximum Fall Time: 3 ns/2.2 ns
• Pulse Width Distortion: 0.12 ns/0.2 ns
• Maximum Output Current: 50 mA
• Operating Supply Voltage: 3.135 V to 3.465 V
• Maximum Operating Temperature: + 85 C
• Minimum Operating Temperature: - 40 C
• Package / Case: DIP With Connector
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: Multimode Glass
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant
• Other names: 516-1992

Regulatory Compliance
These transceiver products are intended to enable com-
mercial system designers to develop equipment that com-
plies with the various international regulations governing
certification of Information Technology Equipment. See
the Regulatory Compliance Table for details. Additional
information is available from your Avago Technologies
sales representative.
Electrostatic Discharge (ESD)
There are two design cases in which immunity to ESD
damage is important.
The first case is during handling of the transceiver prior
to mounting it on the circuit board. It is important to use
normal E SD h andling p recautions f or E SD s ensitive d evices.
These precautions include using grounded wrist straps,
work benches, and floor mats in ESD controlled areas.
The second case to consider is static discharges to the ex-
terior of the equipment chassis containing the transceiver
parts. T o the extent that the MT-RJ connector is exposed to
the outside of the equipment chassis it may be subject to
whatever ESD system level test criteria that the equipment
is intended to meet.
9
Regulatory Compliance Table
Feature
Electrostatic Discharge
(ESD) to the Electrical Pins
Electrostatic Discharge
ESD) to the MT-RJ Receptacle
Electromagnetic
Interference (EMI)
Immunity
Eye Safety
RoHS Compliance
Test Method
MIL-STD-883C
Method 3015.4
Variation of
IEC 801-2
FCC Class B
CENELEC CEN55022
VCCI Class 2
Variation of IEC61000-4-3
IEC 825 Issue 1 1993:11
Class 1
CENELEC EN60825 Class 1
Performance
Meets Class 2 (2000 to 3999 Volts).
Withstand up to 2200 V applied between electrical pins.
Typically withstand at least 25 kV without damage when the MT-
RJ Connector Receptacle is contacted by a Human Body Model
probe.
Typically provide a 10 dB margin to the noted standards,
however, it should be noted that final margin depends on the
customer’s board and chasis design.
Typically show no measurable effect from a 10 V/m field swept
from 10 to 450 MHz applied to the transceiver when mounted to
a circuit card without a chassis enclosure.
Compliant per
conditions.
TUV Certification: LED Class 1
Reference to EU RoHS Directive 2002/95/EC
Electromagnetic Interference (EMI)
Most equipment designs utilizing this high speed trans-
ceiver from Avago Technologies will be required to meet
the requirements of FCC in the United States, CENELEC
EN55022 (CISPR 22) in Europe and VCCI in Japan.
Immunity
Equipment utilizing these transceivers will be subject to
radio-frequency electromagnetic fields in some environ-
ments. These transceivers have a high immunity to such
fields.
Transceiver Reliability and Performance Qualification
Data
The 2 x 5 transceivers have passed Avago Technologies’
reliability and performance qualification testing and are
undergoing ongoing quality and reliability monitoring.
Details are available from your Avago Technologies sales
representative.
Applications Support Materials
Contact your local Avago Technologies Component Field
Sales Office for information on how to obtain evaluation
boards for the 2 x 5 transceivers.
Avago Technologies
testing under single fault