151-0153 Rabbit Semiconductor, 151-0153 Datasheet - Page 138

• Manufacturer Part Number: 151-0153
• Description: ASSEMBLY - RABBITFLEX CABLES
• Manufacturer: Rabbit Semiconductor
• Series: RabbitFLEX™r

Specifications of 151-0153

• Accessory Type: Cable Assembly
• For Use With/related Products: BL300F
• Lead Free Status / RoHS Status: Vendor undefined / Vendor undefined

A.2 Conformal Coating
The areas around the crystal oscillator and the battery backup circuit on the PowerCore module have had
the Dow Corning silicone-based 1-2620 conformal coating applied. The conformal coating protects these
high-impedance circuits from the effects of moisture and contaminants over time.
The conformally coated area on the PowerCore module is on its bottom side. This area is inaccessible
when the module is attached to the RabbitFLEX base board. Under normal circumstances, there is no need
to access it. Any components in the conformally coated area may be replaced using standard soldering pro-
cedures for surface-mounted components. A new conformal coating should then be applied to offer con-
tinuing protection against the effects of moisture and contaminants.
The PowerCore FLEX User’s Manual contains further information and an illustration of the conformally
coated area.
132
Input Power
Options
Operating
Temperature
Humidity
Standoffs/Spacers
Board Size (without
wiring harness)
Parameter
NOTE: For more information on conformal coatings, refer to Rabbit Technical Note 303,
“Conformal Coatings.”
DC
AC
Table A-1. RabbitFLEX BL300F Specifications (Continued)
Unregulated 8-43 V DC (draws 13.3 W) Unregulated 8-40 V DC (draws 6.7 W)
24–60 V AC with center-tapped
transformer (draws 13.3 W)
12-36 V AC with untapped standard
transformer (draws 13.3 W)
With PowerCore 3800
www.rabbit.com
(95 mm × 152 mm × 31 mm)
5% to 95%, noncondensing
3.725" × 6.000" × 1.22"
–40°C to +70°C
Provision for 6
19–57 V AC with center-tapped
transformer (draws 6.7 W)
10-29 V AC with untapped standard
transformer (draws 6.7 W)
With PowerCore 3810