151-0153 Rabbit Semiconductor, 151-0153 Datasheet - Page 72

• Manufacturer Part Number: 151-0153
• Description: ASSEMBLY - RABBITFLEX CABLES
• Manufacturer: Rabbit Semiconductor
• Series: RabbitFLEX™r

Specifications of 151-0153

• Accessory Type: Cable Assembly
• For Use With/related Products: BL300F
• Lead Free Status / RoHS Status: Vendor undefined / Vendor undefined

66
digout_groups.c
keypad.c
lcd.c
master.c
parity.c
RabbitFLEX_BL300F_Board_
Options.c (a.k.a.,
RabbitFLEX_SBC40_Board_
Options.c)
serial_number.c
simple3wire.c
simple5wire.c
sflash_pattern_inspect.c
sflash_test.c
slave.c
Program Name
Table 6-1. RabbitFLEX BL300F Sample Programs
Demonstrates software grouping capability. Displays all digital outputs,
then prompts for which inputs to group together. After the group is
created, each successive digital output channel is set to “1” while the
others are set to “0.”
You must have a keypad configured for your RabbitFLEX board to run
this program. It will automatically configure the keys on your keypad to
display to Stdio when pressed. It will also allow you to set whether the
keys should repeat when held down
You must have an LCD display configured for your RabbitFLEX board
to run this program. It demonstrates how to use each of the RabbitFLEX
LCD functions. First, select the desired command from the menu. Then,
if necessary, enter the parameter (a character, a string, etc.) for the
selected command.
You must have the RS485 option installed to use this sample program.
This program demonstrates a simple RS485 transmission of lower case
letters to a slave controller. The slave will send converted upper case
letters back to the master controller to be displayed in the Stdio window.
Use slave.c to program the slave controller.
Demonstrates the use of parity checking in the RS232 driver. You must
have 2 available serial ports to use this driver.
This program is intended to support targetless compilation. It displays a
list of macro definitions to the Stdio window that must be used for
targetless compilation to the attached board.
Displays design number and serial number (unique for each unit) of the
RabbitFLEX BL300F.
Demonstrates the use of a 3-wire serial port. You must have 1 available
serial port to use this driver.
Demonstrates the use of a 5-wire (hardware handshaking) serial port.
You must have 2 serial ports available to use this driver—one port will
be used for the hardware handshaking lines.
This program demonstrates the use of a serial flash by writing a pattern
to the first 100 pages which then can be inspected or cleared by the user.
Tests that an installed serial flash device is operating correctly.
You must have the RS485 option installed to use this sample program.
This program demonstrates a simple RS485 transmission of characters
to a master controller. The slave will send converted upper case letters
back to the master controller to be displayed in the Stdio window. Use
master.c to program the master controller.
www.rabbit.com
Description
Applications Programming