HS1650ECN61H Renesas Electronics America, HS1650ECN61H Datasheet - Page 23

• Manufacturer Part Number: HS1650ECN61H
• Description: PCB ADAPTER 120TQFP
• Manufacturer: Renesas Electronics America

Specifications of HS1650ECN61H

• Accessory Type: User Interface Cable
• For Use With/related Products: H8SX/1650
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

1. Turn on the emulator according to the procedures described in the H8SX/1650 Series E6000H
2. Verify the user system interface cable connections by checking the pin states with the CHECK
3. The emulator connected to this user system interface board supports three kinds of clock sources
Figure 8 shows the clock oscillator on the user system interface board.
12
Emulator User's Manual (HS1650EPH60HE).
command (emulator command) and checking the bus states with the FILL command (emulator
command). If an error is detected, recheck the soldered IC socket and the location of pin 1.
as the MCU clock. For details, refer to the H8SX/1650 Series E6000H Emulator User's Manual
(HS1650EPH60HE).
To use the emulator internal clock
Select the clock in the emulator by the CLOCK command (emulator command).
To use the external clock on the user system
Supply the external clock from the user system to the emulator by inputting the EXTAL pin
(pin 84) on the user system interface board or connecting the crystal oscillator to the XTAL
(pin 83) and EXTAL pins. For details, refer to the H8SX/1650 Hardware Manual.
EXTAL XTAL
System clock
HCU04
1 M
Section 3 Verifying Operation
270
HCU04
Figure 8 Clock Oscillator
HCU04
HCU04
HCU04
HCU04
0
To E6000H
emulator