HS2655ECN61H Renesas Electronics America, HS2655ECN61H Datasheet - Page 12

• Manufacturer Part Number: HS2655ECN61H
• Description: DEV EMULATOR PCB ADAPTOR
• Manufacturer: Renesas Electronics America

Specifications of HS2655ECN61H

• Accessory Type: User Interface Cable
• For Use With/related Products: H8S/2655
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

2.2.2
After fastening, solder the IC socket for a TFP-120 package to the user system. Be sure to
completely solder the leads so that the solder slops gently over the leads and forms solder fillets.
(Use slightly more solder than the MCU.)
2.2.3
Align pin 1 on the IC socket for a TFP-120 package on the user system with pin 1 on the user system
interface cable head, and insert the user system interface cable head into the IC socket on the user
system, as shown in figure 3.
2.2.4
6
1. Use a Phillips-type screwdriver whose head matches
2. The tightening torque must be 0.098 N•m or less.
3. If the emulator does not operate correctly, cracks might
Soldering IC Socket
Inserting Cable Head
Check the location of pin 1 before inserting.
Fastening Cable Head
the screw head.
If the applied torque cannot be accurately measured,
stop tightening when the force required to turn the screw
becomes significantly greater than that needed when first
tightening. If a screw is tightened too much, the screw
head may break or an IC socket contact error may be
caused by a crack in the IC socket solder.
have occurred in the solder. Check conduction with
a tester and re-solder the IC socket if necessary.
CAUTION
CAUTION