HS3864ECH61H Renesas Electronics America, HS3864ECH61H Datasheet - Page 22

• Manufacturer Part Number: HS3864ECH61H
• Description: DEV EMULATOR PCB ADAPTOR
• Manufacturer: Renesas Electronics America

Specifications of HS3864ECH61H

• Accessory Type: User Interface Cable
• For Use With/related Products: H8/3864
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

1. Make sure that pin 1 on the user system IC socket is correctly aligned with pin 1 on the cable
2. The dimensions of the recommended mount pad for the user system IC socket are different from
3. This user system interface cable is specifically designed for the HS3880EPI60H emulator. Do
4. To prevent breaking of wires in the cable body, do not place heavy or sharp metal objects on the
5. While the emulator station is connected to the user system with the user system interface cable,
6. The P1 short connector is used for testing. Do not remove the short pins that are inserted in the
16
head before inserting the cable head into the user system IC socket.
those of the MCU.
not use this cable with any other emulator station.
user system interface cable.
force must not be applied to the cable head. Place the emulator station, user system interface
cable, and user system as shown in the example in figure 10.
sides of pin 1 and pin 2.
Figure 10 User System Interface Cable Location Example
Emulator station
Figure 11 P1 Short Connector
Section 5 Notice
P1
Place components so that the cable body and cable head are
parallel to the user system.
3
1
Cable
User system
Cable head is parallel
to emulator station
Cable head is parallel
to user system