HS7047ECH61H Renesas Electronics America, HS7047ECH61H Datasheet - Page 24

• Manufacturer Part Number: HS7047ECH61H
• Description: DEV EMULATOR PCB ADAPTOR FP-100M
• Manufacturer: Renesas Electronics America

Specifications of HS7047ECH61H

• Accessory Type: User Interface Cable
• For Use With/related Products: SH7047
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

1. Turn on the emulator according to the procedures described in the SH7046 E6000H Emulator
2. Verify the user system interface cable connections by checking the pin states with the extended
3. The emulator connected to this user system interface board supports three kinds of clock
User's Manual (HS7046EPH60HE).
monitor and checking the bus states with the FILL command (emulator command). If an error
is detected, recheck the soldered IC socket and the location of pin 1.
sources as the MCU clock. For details, refer to the SH7046 E6000H Emulator User's Manual
(HS7046EPH60HE).
To use the emulator internal clock
Select the clock in the emulator by the CLOCK command (emulator command).
To use the external clock on the user system
Supply the external clock from the user system to the emulator by inputting the EXTAL
pin (pin 96) on the user system interface board or connecting the crystal oscillator to the
XTAL (pin 97) and EXTAL pins. For details, refer to section 4, Clock Pulse Generator, in
the SH7047 Series Hardware Manual.
Figure 8 shows the clock oscillator on the user system interface board.
EXTAL XTAL
System clock
HCU04
1 M
Section 4 Verifying Operation
270
HCU04 HCU04
Figure 8 Clock Oscillator
HCU04
HCU04
HCU04
47
To E6000H
emulator
13