HS2258ECH61H Renesas Electronics America, HS2258ECH61H Datasheet - Page 26

• Manufacturer Part Number: HS2258ECH61H
• Description: DEV EMULATOR PCB ADAPTOR TFP-100
• Manufacturer: Renesas Electronics America

Specifications of HS2258ECH61H

• Accessory Type: User Interface Cable
• For Use With/related Products: H8S/2258
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

1. When using the E6000 emulator for the H8S/2633 series, turn on the emulator according to the
2. Verify the user system interface cable connections by accessing the external memory and ports to
3. The emulator connected to this user system interface cable supports two kinds of clock sources as
procedures described in the H8S/2633 Series E6000 Emulator User's Manual
(HS2633EPI61HE).
check the bus states of the pins with the MEMORY_FILL command (emulator command). If an
error is detected, recheck the soldered IC socket and the location of pin 1.
the MCU clock: an emulator internal clock and an external clock on the user system. For details,
refer to the H8S/2633 series E6000 Emulator User's Manual (HS2633EPI61HE).
To use the emulator internal clock
Select the clock in the emulator station as the system clock ( ), by using the CLOCK
command (emulator command).
To use the external clock on the user system
Supply the external clock from the user system to the emulator. Connect a crystal oscillator to
the EXTAL and XTAL terminals for the system clock ( ). Select the external clock as the
system clock ( ), by using the CLOCK command (emulator command). For details, refer to
section 18, Clock Pulse Generator, in the H8S/2258 Series Hardware Manual.
Section 4 Verifying Operation
13