HS7018EWN61H Renesas Electronics America, HS7018EWN61H Datasheet - Page 24

• Manufacturer Part Number: HS7018EWN61H
• Description: DEV EMULATOR PCB ADAPTOR TFP-100
• Manufacturer: Renesas Electronics America

Specifications of HS7018EWN61H

• Accessory Type: User Interface Cable
• For Use With/related Products: SH7018
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

6.2
To connect the cable head to the user system, follow the instructions below.
6.2.1
After checking the location of pin 1 on the IC socket, apply epoxy resin adhesive to the bottom of
the IC socket for a TFP-100B package, and fasten it to the user system before soldering.
6.2.2
After fastening, solder the IC socket for a TFP-100B package to the user system. Be sure to
completely solder the leads so that the solder slops gently over the leads and forms solder fillets.
(Use slightly more solder than the MCU.)
product before the USER SYSTEM INTERFACE CABLE
is connected to or removed from any part. Before
connecting, make sure that pin 1 on both sides are correctly
aligned. Failure to do so will result in a FIRE HAZARD and
will damage the user system and the emulator product or
will result in PERSONAL INJURY. The USER PROGRAM will
be LOST.
Connecting User System Interface Cable to User System
Always switch OFF the user system and the emulator
Installing IC Socket
Soldering IC Socket
WARNING
11