HS2215RECB62H Renesas Electronics America, HS2215RECB62H Datasheet - Page 22

• Manufacturer Part Number: HS2215RECB62H
• Description: DEV EMULATOR PCB ADAPTOR BP-112
• Manufacturer: Renesas Electronics America

Specifications of HS2215RECB62H

• Accessory Type: User Interface Cable
• For Use With/related Products: H8S/2215
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

2.2.3
The user system interface cable (HS2215ECB62H) head and the IC socket for the BP-112
package on the user system have no pin dedicated for alignment. Use the follow procedure to
fasten the cable head.
1. Insert two screws (M1.6 x 8 mm) to
1. Use the screwdriver whose head matches the screw
2. The tightening torque must be 0.054 N•m or less.
3. If the emulator does not operate correctly, cracks might
' match, respectively.
head.
Fastening Cable Head
If the applied torque cannot be accurately measured,
stop tightening when the force required to turn the screw
becomes significantly greater than that needed when first
tightening. If a screw is tightened too much, the screw
head will break or an IC socket contact error will be
caused by a crack in the IC socket solder.
have occurred in the solder.
Figure 4 Fastening Cable Head Procedure (1)
CAUTION
and , and screw it a little so that holes at - ' and -
9