CX1004 Xeltek, CX1004 Datasheet - Page 75

• Manufacturer Part Number: CX1004
• Description: SOCKET ADAPTER 48TSOP SUPERPRO5K
• Manufacturer: Xeltek

Specifications of CX1004

• Module/board Type: Socket Module - TSOP
• Positions/sockets: 48
• Accessory Type: TSOP48 (20*28 Socket Size) Adapter For SuperPro 5000/5004GP
• Rohs Compliant: Yes
• For Use With/related Products: SuperPro 5000
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 415-1039

VI. Standalone Operation
After the necessary project file(s) is downloaded into the CF card, turn the
programmer OFF, disconnect the programmer from PC, and turn the
programmer ON again.
Downloading Library Creation
Creating Project Files
Under the standalone mode, the programmer can program the devices of the same
model according to the different requirements, or program different devices. The
maximum number of the programming methods that the programmer supports
depends on the storage capacity of the programmer hardware. The selection of the
programming method depends on the information saved in the project file.
Example: Two Atmel AT89C51 chips are going to be programmed with two
Superpro
3. Press ‚Enter‛ and ‚SELECT PROJECT‛. Use
4. Press ‚EXIT‛ and ‚RUN‛, then select ‚Auto‛ or other functions to
READ operation may change the content in the buffer. READ function
should be disabled for normal operation. Run LOAD PROJ DATA
function to restore the project data. 
for programming.
program a chip.
®
different files. If the storage capacity is enough, add an AMD
AM27C128.
You would complete the following steps:
5000 User’s Guide
1.
2.
3.
4.
Select Atmel AT89C51.
Load the first file for programming.
Edit the Auto function to include Erase, Blank_check,
Program, and Verify.
Execute the Auto function. After the successful completion of
the programming operation, check the chip in the target system.
↑
or
↓
to select a project
75