USB-MSD-RD Silicon Laboratories Inc, USB-MSD-RD Datasheet - Page 3

• Manufacturer Part Number: USB-MSD-RD
• Description: KIT REF DES USB MASS STORAGE
• Manufacturer: Silicon Laboratories Inc

Specifications of USB-MSD-RD

• Main Purpose: Memory, USB Mass Storage
• Embedded: Yes, MCU, 8-Bit
• Utilized Ic / Part: C8051F340-DK
• Primary Attributes: Supports CF SD & MMC Cards,
• Secondary Attributes: Requires C8051F340DK Development Kit
• Interface Type: RS-232
• Operating Supply Voltage: 50 V
• Product: Interface Modules
• For Use With/related Products: C8051F340
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Contains lead / RoHS non-compliant
• Other names: 336-1320

4. USB MSD RD Firmware
The USB MSD RD includes all the 'F340 firmware necessary to handle the following:
Also included is an example application that can perform the following tasks:
The USB MSD RD System Architecture shown in Figure 3 gives an overview of the various components that
constitute the USB MSD RD firmware. The code space usage chart in Figure 4 shows the amount of code space
used by the firmware components. Detailed descriptions of the components and API functions are included in
“AN282: USB Mass Storage Device Reference Design Programmer's Guide".
To implement your own application based on this USB MSD Reference Design, you can customize the blocks
labeled 'Application', 'Other HW Peripherals', and 'App. Specific Hardware' (all shown in blue in Figure 3). Source
code for all the other firmware blocks is also provided, but typically there is no need to customize these blocks.
USB enumeration and standard requests
MSD class requests
SCSI command set
Media access - SD, MMC and CompactFlash card formats
FAT16 file system support
Present an interactive command shell via the UART
Measure temperature using the on-chip temperature sensor and ADC
Monitor the state of the two push-button switches on the target board
Log the temperature and button state information to log files in the memory card
Rev. 0.1
USB-MSD-RD
3