EVB-LAN9500A-MII SMSC, EVB-LAN9500A-MII Datasheet - Page 26

• Manufacturer Part Number: EVB-LAN9500A-MII
• Description: EVALUATION BOARD LAN9500-ABZJ
• Manufacturer: SMSC
• Series: 0133r

Specifications of EVB-LAN9500A-MII

• Main Purpose: Interface, Ethernet Controller (PHY and MAC)
• Embedded: No
• Utilized Ic / Part: LAN9500
• Primary Attributes: Single Chip Hi-Speed USB to 10/100 Ethernet
• Secondary Attributes: Full Duplex and HP Auto-MDIX Support, 10BASE-T and 100BASE-TX
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 638-1072; EVB9500MII

Revision 1.0 (05-17-10)
0Ah
0Bh
0Ch
0Dh
0Eh
0Fh
1Ah
1Bh
1Ch
1Dh
1Eh
1Fh
09h
10h
11h
12h
13h
14h
15h
16h
17h
18h
19h
20h
Note: EEPROM byte addresses past the indicated address can be used to store data for any
purpose:
LAN9500/LAN9500i - 1Dh
LAN9500A/LAN9500Ai - 20h
Configuration Flags
Language ID Descriptor [7:0]
Language ID Descriptor [15:8]
Manufacturer ID String Descriptor Length (bytes)
Manufacturer ID String Descriptor EEPROM Word Offset
Product Name String Descriptor Length (bytes)
Product Name String Descriptor EEPROM Word Offset
Serial Number String Descriptor Length (bytes)
Serial Number String Descriptor EEPROM Word Offset
Configuration String Descriptor Length (bytes)
Configuration String Descriptor Word Offset
Interface String Descriptor Length (bytes)
Interface String Descriptor Word Offset
Hi-Speed Device Descriptor Length (bytes)
Hi-Speed Device Descriptor Word Offset
Hi-Speed Configuration and Interface Descriptor Length (bytes)
Hi-Speed Configuration and Interface Descriptor Word Offset
Full-Speed Device Descriptor Length (bytes)
Full-Speed Device Descriptor Word Offset
Full-Speed Configuration and Interface Descriptor Length (bytes)
Full-Speed Configuration and Interface Descriptor Word Offset
(LAN9500A/LAN9500Ai Only)
GPIO7:0 Wakeup Enables
Bit x = 0 -> GPIOx Pin Disabled for Wakeup Use.
Bit x = 1 -> GPIOx Pin Enabled for Wakeup Use.
(LAN9500A/LAN9500Ai Only)
GPI010:8 Wakeup Enables
Bit x = 0 -> GPIO(x+8) Pin Disabled for Wakeup Use.
Bit x = 1 -> GPIO(x+8) Pin Enabled for Wakeup Use.
Note:
(LAN9500A/LAN9500Ai Only)
GPIO PME Flags
Table 5.1 EEPROM Format (continued)
Bits 7:3 Unused.
DATASHEET
26
USB 2.0 to 10/100 Ethernet Controller
SMSC LAN950x Family
Datasheet