ADC08D1500DEV/NOPB National Semiconductor, ADC08D1500DEV/NOPB Datasheet - Page 20

• Manufacturer Part Number: ADC08D1500DEV/NOPB
• Description: BOARD DEV FOR ADC08D1500
• Manufacturer: National Semiconductor
• Series: PowerWise®r

Specifications of ADC08D1500DEV/NOPB

• Mfg Application Notes: Clocking High-Speed A/D Converters AppNote
• Number Of Adc's: 2
• Number Of Bits: 8
• Sampling Rate (per Second): 1.5G
• Data Interface: Serial
• Inputs Per Adc: 1 Differential
• Input Range: 870 mVpp
• Power (typ) @ Conditions: 1.8W @ 1.5GSPS
• Voltage Supply Source: Single Supply
• Operating Temperature: -40°C ~ 85°C
• Utilized Ic / Part: ADC08D1500
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: ADC08D1500DEV

20
9.4 Capturing Waveforms
When the ADC has been configured as required, the selected input(s) can be sampled by clicking the
“Acquire” pull-down menu and selecting “Samples”. Alternatively press F1 then the Escape key.
10.0 Appendix A - Hardware Information
10.1 LED functions
The function of the LEDs on the front panel of the boards is as follows
STB – STANDBY, illuminates when the board is in standby mode.
TRG – TRIGGER EVENT, illuminates when the Trigger Input makes low to high transition
OVR – ADC OVER RANGE, illuminates when the I or Q channel exceeds the full scale range of the ADC
CLK – CLOCK INPUT, flashes with 50% duty cycle if the ADC is receiving a good clock input.
PWR – POWER, illuminates when the external 12V is connected and the system is not in Standby.
UPL – UPLOAD, illuminates when the FPGA is uploading sample data to the PC
SMP – SAMPLE, illuminates when the FPGA is sampling data and storing to the FIFO buffers
IDL – IDLE, illuminates when the system is IDLE.