SI3452MS8-KIT Silicon Laboratories Inc, SI3452MS8-KIT Datasheet - Page 2

• Manufacturer Part Number: SI3452MS8-KIT
• Description: BOARD EVAL FOR SI3452
• Manufacturer: Silicon Laboratories Inc
• Type: Controllers & Processorsr

Specifications of SI3452MS8-KIT

• Main Purpose: Special Purpose DC/DC, Power Over Ethernet
• Board Type: Fully Populated
• Utilized Ic / Part: Si3452
• Interface Type: Ethernet, USB, I2C
• Operating Voltage: 3.3 V
• Operating Temperature Range: - 40 C to + 85 C
• Product: Modules
• For Use With/related Products: Si3452
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Current - Output: -
• Voltage - Output: -
• Voltage - Input: -
• Power - Output: -
• Frequency - Switching: -
• Outputs And Type: -
• Regulator Topology: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 336-1836

Si3452MS8-KIT
2. Kit Contents
This user’s guide includes instructions on the use of the Si3452 register control GUI. An optional Power Manager
GUI is described in the SI3452 Power Manager GUI user’s guide on the CD-ROM. The installation instructions for
the hardware and USB to I
Power Manager GUI.
2
Kit
Si3452MS8-EVB r1.1 The Si3452 8-port evaluation board with connector for an external 50 V power supply. The
Si3452CB-EVB r1.1
USB-SMBus-EB3
Si3402ISO-EVB
Si3402ISO-C4-EVB
CD-ROM
power supply must be capable of supplying the required amount of power for all PoE loads
being connected. Standard boards are populated with Si3452-B01-GM parts.
An RJ-45 connector board configured as power over Ethernet Gigabit mid-span injector.
A 24-wire cable to connect the Si3452 evaluation board to the mid-span injector board
A USB to I
ware to support I
A wire for connecting the USB to SMBus power pin to the isolator of the Si3452 evaluation
board.
A USB cable to connect to a host PC
A PD evaluation board configured to provide a Class 3 signature.
A PD evaluation board configured to provide a Class 4 signature.
10  loads for the evaluation boards. Each load will consume 2.5 W, which is about 3 W
referred to the PSE side.
Two Ethernet cables to connect the Si3400 and Si3401 evaluation boards to the connector
board.
Software drivers for the USB to SMBus adapter and a GUI for the Si3452 registers on a
CD-ROM. Applicable applications notes and data sheets are also included.
2
C driver in this user’s guide must be followed before installing and using the Si3452
2
C (or SMBus) evaluation board. This board is preconfigured with updated firm-
Table 1. Evaluation Kit Contents
2
C transactions.
Rev. 0.5
Contents