DM183032 Microchip Technology, DM183032 Datasheet - Page 21

• Manufacturer Part Number: DM183032
• Description: BOARD EXPLORER PICDEM PIC18
• Manufacturer: Microchip Technology
• Series: MPLAB®r
• Type: MCUr

Specifications of DM183032

• Contents: Evaluation Board
• Processor To Be Evaluated: PIC 18
• Data Bus Width: 8 bit
• Interface Type: RS-232, USB
• Silicon Manufacturer: Microchip
• Core Architecture: PIC
• Core Sub-architecture: PIC18
• Silicon Core Number: PIC18F
• Silicon Family Name: PIC18F8xxx, PIC18FxxJxx
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With/related Products: PIC18 Series
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

© 2008 Microchip Technology Inc.
2.4.2
This section describes how to program the PICDEM PIC18 Explorer Demonstration
Board using the MPLAB
Hex code on the compact disc in the PICDEM PIC18 Explorer Demonstration Board’s Kit.
2.4.2.1
To program the PIC18F8722:
1. Launch the MPLAB IDE application and select Configure>Select
2. To start the programmer, select Programmer>Select Programmer> ICD2.
3. To open the Hex code file, select File>Import>Open and select
4. Connect the J4 jumper to Main (main controller), as shown in Figure 2-7.
FIGURE 2-7:
5. Move the S4 switch to PIC MCU, as described in “Using the Board As Is” on
To program the PIC18F87J11 on the PIM:
1. Attach the PIM to the demonstration board.
2. Move the S4 switch to ICE.
3. Launch the MPLAB IDE application and select Configure>Select
4. To start the programmer, select Programmer>Select Programmer>ICD2.
5. To open the Hex code file, select File>Import>Open and select
6. Connect the J4 jumper to Main (main controller), as shown in Figure 2-7.
Device>18F8722.
CD/Hex/18F8722/Demo8722.hex.
page 10.
Device>18F87J11.
CD/Hex/18F87J11/Demo87J11.hex.
Note:
Loading the Program
REPROGRAMMING WITH THE COMPACT DISC SAMPLE CODE
Jumper Location
Both steps 1 and 2 are described in “Attaching the PIM” on page 13.
J4 JUMPER AND ‘MAIN’ SETTING
®
Integrated Development Environment (IDE) and the sample
J4 Jumper
Getting Started
Jumper Setting
USB
J4
Main
DS51721B-page 17