STM3210B-EVAL STMicroelectronics, STM3210B-EVAL Datasheet - Page 48

• Manufacturer Part Number: STM3210B-EVAL
• Description: BOARD EVALUATION FOR STM32
• Manufacturer: STMicroelectronics
• Type: MCUr

Specifications of STM3210B-EVAL

• Contents: Fully Assembled Evaluation Board
• Processor To Be Evaluated: STM32F10x
• Data Bus Width: 32 bit
• Interface Type: USB
• Operating Supply Voltage: 5 V
• Silicon Manufacturer: ST Micro
• Core Architecture: ARM
• Core Sub-architecture: Cortex - M3
• Silicon Core Number: STM32
• Silicon Family Name: STM32F1xx
• For Use With/related Products: STM32
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 497-6048

Demonstration programming using the DFU
4
Note:
4.1
4.1.1
4.1.2
48/57
Demonstration programming using the DFU
This section explains how to use the DFU (device firmware upgrade) application to program
the demonstration application. It also describes the files needed for the STM3210B-EVAL
board.
When using the DFU application make sure that in the STM3210B-EVAL board, jumper JP1
is in the position 2-3.
Using the DFU application
The DFU application is split into two categories.
DFU firmware
Load the DFU firmware into the Root Part Number 2’s internal Flash memory using the
desired Toolchain. The DFU firmware is a part of the USB development kit and is available
for download from the STMicroelectronics website: www.st.com.
DFU PC software
The DfuSe demonstration user interface is designed to work with all STMicroelectronics
devices that support USB Device Firmware Upgrade. The installation software and the
documentation are available for download from the ST website http://www.st.com.
Software installation
Run the setup.exe file: the InstallShield Wizard will guide you through the installation of the
DfuSe applications and source code on your computer. The driver files are located in the
Driver folder in the installation path (default: C:\Program Files\STMicroelectronics\DfuSe).
Doc ID 13534 Rev 5
UM0435