MB2146-410A-01-E Fujitsu Semiconductor America Inc, MB2146-410A-01-E Datasheet - Page 24

• Manufacturer Part Number: MB2146-410A-01-E
• Description: KIT STARTER MB95200/210H SERIES
• Manufacturer: Fujitsu Semiconductor America Inc
• Series: F²MC-8FXr
• Type: MCUr

Specifications of MB2146-410A-01-E

• Contents: Board, BGM Adapter, Documentation, Cable, CD
• For Use With/related Products: MB95200H, MB95210H
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 865-1107

5. Development Platform Quick Start
5.1 Tools Setup Sequence
5.2 Open Project and Start Debug
5.3Operation Precautions
20
Start the debugging system in the following sequence:
Users can start a debug from a PC software S
IO_LED project for example.
If the entire procedure goes right, a debug will start normally.
• Connect a BGMA to the PC using a USB cable, confirm the LED on the BGMA is Green;
• Connect an EV-board to BGMA IDC10 socket;
• Select the EV-board power supply and turn on the EV-board, confirm the LED on the BGMA
• Start the S
• Click “Open workspace” from “File” Menu in S
• Select “IO_LED.wsp” in “Open Space” window;
• Click “Start debug” from “Debug” Menu.
• All pins of MB95200H/210H MCU are connected to Testing Pin on the EV-board. If the user
• Note that J2 shall be open while debugging using the BGMA. User reset from S3 (reset key)
• It’s recommended that only one power supply is used as a power module input at a time.
is Orange and the Power LED on the EV-board is on.
TUNE Workbench” in Windows;
wants to test separate pin performance, do disconnect the header of related peripheral mod-
ules.
is invalid when J2 is open. To use reset key S3 in a normal mode, J2 should be closed.
OFTUNE
from “Startup Menu>Programs> SOFTUNE V3> FFMC-8L Family SOF-
OFTUNE
workbench in the following sequence. Here take
OFTUNE
;