R0K330290S000BE Renesas Electronics America, R0K330290S000BE Datasheet - Page 10

• Manufacturer Part Number: R0K330290S000BE
• Description: KIT EVAL STARTER FOR M16C/29
• Manufacturer: Renesas Electronics America
• Series: Renesas Starter Kits (RSK)r
• Type: MCUr

Specifications of R0K330290S000BE

• Contents: CPU Board, LCD Display Module, E8 Emulator, Cable, QuickStart Guide and CD-ROM
• Architecture: 8/16-bit
• For Use With/related Products: M16C/29
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

The tutorial project build settings have been pre-configured in the tool-chain options. To view the tool chain options select the ‘Build’ Menu
item and the relevant tool-chain. This should be the first option(s) on the drop down menu.
The dialog that is displayed will be specific to the tool-chain selected.
The configuration pane on the left hand side will exist on all the
tool-chain options. It is important when changing any setting to be
aware of the current configuration that is being modified. If you
wish to modify multiple or all build configurations this is possible by
selecting ‘All’ or ‘Multiple’ from the ‘Configuration’ drop down list.
When complete close the dialog box by clicking <OK>.
5.1.Building Code
There are three short cuts available for building the project.
During the build each stage will be reported in the Output Window.
The build will complete with an indication of errors and warnings encountered during the build.
5.2.Connecting the debugger
For this tutorial it is not necessary to provide an external power supply to the board. The power will be obtained from the USB port. Please
be aware that if you have too many devices connected to your USB port it may be shut down by windows. If this happens remove some
devices and try again. Alternatively provide an external power source taking care to ensure the correct polarity and voltage.
•
•
•
•
•
Review the options on each of the tabs and
‘Category’ drop down lists to be aware of the
options available.
Select the ‘Build All’ tool bar button.
This will build everything in the project that has not been excluded from the build. This includes the standard library.
Select the ‘Build’ tool bar button.
This will build all files that have changed since the last build. The standard library will not be built unless an option has been
changed.
Press ‘F7’
This is equivalent to pressing the ‘Build’ button described above.
Build the project now by pressing ‘F7’ or pressing one of the build icons as shown above.
Chapter 5. Building the Tutorial Project
6