R0K3306NKS001BE Renesas Electronics America, R0K3306NKS001BE Datasheet - Page 11
![KIT DEV RSK RSK-M16C/6NK](/photos/9/23/92367/r0k3306nks001be_sml.jpg)
R0K3306NKS001BE
Manufacturer Part Number
R0K3306NKS001BE
Description
KIT DEV RSK RSK-M16C/6NK
Manufacturer
Renesas Electronics America
Series
Renesas Starter Kits (RSK)r
Type
MCUr
Datasheet
1.R0K3306NKS001BE.pdf
(33 pages)
Specifications of R0K3306NKS001BE
Contents
CPU Board, LCD Display Module, E8 Emulator, Cable, QuickStart Guide and CD-ROM
For Use With/related Products
M16C/6NK
Lead Free Status / RoHS Status
Not applicable / Not applicable
6.1. Switches
There are four switches located on the RSK. The function of each switch and its connection are shown in Table 6-1.
*Refer to schematic for detailed connectivity information.
6.2. LEDs
There are six LEDs on the RSK board. The green ‘POWER’ LED lights when the board is powered. The orange BOOT LED indicates the
device is in BOOT mode when lit. The four user LEDs are connected to an IO port and will light when their corresponding port pin is set low.
Table 6-2, below, shows the LED pin references and their corresponding microcontroller port pin connections.
6.3. Potentiometer
A single turn potentiometer is connected to AN0.0 (P10.0) of the microcontroller. This may be used to vary the input analogue voltage value
to this pin between AVCC and Ground.
RES
SW1/BOOT*
SW2*
SW3*
LED0
LED1
LED2
LED3
LED Reference (As shown
Switch
on silkscreen)
When pressed the RSK microcontroller is reset.
Connects to an IRQ input for user controls.
The switch is also used in conjunction with the RES switch to place
the device in BOOT mode when not using the E8a module.
Connects to an IRQ line for user controls.
Connects to the ADC trigger input. Option link allows connection to
IRQ line. The option is a pair of 0R links.
Chapter 6. User Circuitry
Port 4.0
Port 4.1
Port 4.2
Port 4.3
Microcontroller Port Pin function
Table 6-1: Switch Functions
Function
Table 6-2: LED Port
7
52
51
50
49
Microcontroller Pin Number
RESn
INT0 Pin18
(Port 8, pin 2)
INT1 Pin17
(Port 8, pin 3)
ADTRG Pin 98
(Port 9, pin 7)
OR
INT2 Pin16
(Port 8, pin 4)
Microcontroller