M5484LITEKITE Freescale Semiconductor, M5484LITEKITE Datasheet - Page 4

• Manufacturer Part Number: M5484LITEKITE
• Description: KIT DEV FOR MCF548X FAMILY
• Manufacturer: Freescale Semiconductor
• Series: ColdFire®r
• Type: MPUr

Specifications of M5484LITEKITE

• Contents: Module and Misc Hardware
• Processor To Be Evaluated: MCF548x
• Data Bus Width: 32 bit
• Interface Type: RS-232, Ethernet
• For Use With/related Products: MCF548x
• For Use With: 460-1028 - CABLE DISP FREESCALE M5475,85EVB
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Makefile Targets Description
b) If you want to manually configure the kernel and userland:
The compilation process will start.
As a result, the image.bin file will appear in./images directory. This file can be downloaded to the board
using Colilo, described in
2.1
This will run the kernel.
After these steps, you should see the login prompt.
3
4
4. Type make xconfig
5. Type make dep
6. Type make
1. The Colilo directory contains RAM and Flash versions of Colilo. Download the appropriate
2. Run Colilo from 0x1000400 in RAM (0xE0000400 in Flash):
3. Set Colilo network parameters and file name (type '?' for help):
4. Download the image.bin file to address 0x1000:
5. Run image from address 0x2000:
•
•
•
Choose the necessary userland applications and kernel options. Make sure that correct CPU type
is specified (for busybox configuration, 'menuconfig' is called instead of 'xconfig').
Colilo.srec file to address 0x1000000 in RAM or 0xE0000000 in Flash using dBUG (serial or tftp
download). Set up the dBUG network options, set the file name, and type
dBUG> dn.
fresh - preparation before building (this target must be called before first build), restores default
configuration.
images - building of all images without romfs structure rebuilding.
linux - building of Linux kernel.
dBUG> g 0x1000400
colilo> set ip <board_ip>
colilo> set netmask <mask>
colilo> set server <server_ip>
colilo> set image <image_file>
colilo> tftp 0x1000
colilo> g 0x2000
Image loading Steps Using Colilo
Makefile Targets Description
If you have problems building the kernel with current toolchain binaries, try
to rebuild the toolchain from sources. To do this type: make toolchain.
Section 2.1, “Image loading Steps Using
MCF547x/8x Linux BSP Quick Start, Rev. 0.2
NOTE
Colilo.”
Freescale Semiconductor