EDK2215R Renesas Electronics America, EDK2215R Datasheet - Page 16

• Manufacturer Part Number: EDK2215R
• Description: KIT DEV EVAL FOR H8S/2215R
• Manufacturer: Renesas Electronics America
• Series: H8®r
• Type: MCUr

Specifications of EDK2215R

• Contents: 2G (Second-generation) Evaluation Board, HEW debugger support, Cable and CD-ROM
• For Use With/related Products: H8S/2215R
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

7.1.2.1.C
7.1.2.2.C
7.
7.1. HMON
7.1.1. M
7.1.2. B
7.1.3. H
C
The HMON library is built to support modes 4, 5, 6, and 7. The library is also built with the number of parameter
registers set to 3 (Default = 2). This provides more efficient code for Advanced Mode. This option is selectable in the
Toolchain options for the CPU, and can be selectable in the standard projects generator (Not the EDK project
generator as this is already set).
H8S/2215 has no break controller, therefore no breakpoints can be set in FLASH. Code located in RAM may have
multiple breakpoints, and is limited only by the size of the On-Chip RAM.
Double clicking in the breakpoint column in the code sets the breakpoint. Breakpoints will remain unless they are
double clicked to remove them.
HMON is built along with the debug code. Certain elements of the HMON code must remain at a fixed locationin
memory. The following table details the HMON components and their size and location in memory. For more
information, refer to the map file when building code.
RESET_VECTOR
TRAP_VECTORS
HW_BREAK_VECTORS
SCI_VECTORS
PHMON
CHMON
BHMON
FDTInit
FDTUserModeMicroKernel
CUser_Vectors
Will not allow breakpoints to be set in the ROM/FLASH area.
The H8S/2215 does not have a PC break controller. Breakpoints are limited to compiled in Trap instructions. HEW
REAKPOINT
ODE LOCATED IN
ODE LOCATED IN
MON
ODE
ODE
S
C
D
UPPORT
ODE
Section
EVELOPMENT
S
S
IZE
UPPORT
ROM
RAM
HMON Reset Vector (Vector 0)
Required for Startup of HMON
Trap Vectors (Vector 8, 9, 10, 11)
Required by HMON to create Trap Breakpoints in RAM
HMON Break Controller (Vector 27)
Required by HMON to create Breakpoints in ROM
HMON Serial Port Vectors (Vector 80, 81, 82, 83)
Used by HMON when EDK is configured to connect to the
default serial port.
HMON Code
HMON Constant Data
HMON Uninitialised data
FDT User Mode Kernel.
This is at a fixed location and must not be moved. Should the
kernel need to be moved it must be re-compiled.
FDT User Mode Kernel.
This is at a fixed location and must not be moved. Should the
kernel need to be moved it must be re-compiled.
Pointer used by HMON to point to the start of user code.
This is at a fixed location and must not be moved for the Reset
CPU, and Go Reset commands to function.
Description
H’ 000000000
H’ 00000020
H’ 0000006C
H’ 00000160
H’ 00020000
H’ 0002248A
H’ 00FFE000
H’ 00001000
H’ 0003F600
H’ 00002000
Start Location
4
10
4
C
248A
148
20F
11A
7FA
4
(H’bytes)
Size
16