100-3020 Bluetechnix, 100-3020 Datasheet - Page 21

• Manufacturer Part Number: 100-3020
• Description: KIT BLACKFIN STARTER CM-BF537E
• Manufacturer: Bluetechnix
• Type: DSPr

Specifications of 100-3020

• Contents: Board, Module, Power Supply
• For Use With/related Products: ADSP-BF537 Blackfin® Processor
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

5.4 JP1 - Power Supply Jumper
This jumper can be removed in order to insert an AMPERE METER for current measurement of the entire Core
Module.
5.5 JP2 – RTC Power Jumper
This jumper is used to connect the VddRTC pin of the Core Module to 3.3V. You can also use this jumper to connect
a battery (Vcc) to the internal RTC of the Blackfin. For connecting GND use pin 3 of the UART expansion pads.
5.6 JP3
For the CM-BF527 JP3 is used to connect the USB-ID pin to the Core Module. For all other Core Modules, leave it
open!
5.7 JP6 USB-ID
For the CM-BF527 JP6 is used to force the USB-OTG master mode. For all other Core modules leave it open!
5.8 Buttons S3, S6
The Button S3 is the main Reset Button of the Core Module.
The Button S6 is a general-purpose input button on pin 18 of the Core Module.
5.9 General Purpose LEDs
The LED V14 indicates that the board is powered.
The LED’s V9 and V10 are connected to general-purpose IO pins 45 and 16 respectively.
5.10 Ethernet LEDs
DEV-BF5xxDA-lite V5.x Hardware User Manual
Designator
V1
V2
V3
Core Module
CM-BF527
CM-BF533
CM-BF537E
CM-BF537U
CM-BF561
TCM-BF537
Core Module
CM-BF527
CM-BF533
CM-BF537E
CM-BF537U
CM-BF561
TCM-BF537
Table 5-4: Pin assignment of button S6
Color
Yellow
Green
Green
Table 5-5: Core Module LEDs
LED V9
PF11
PF8
PG11
PG11
PF43
PG11
Table 5-6: Ethernet LEDs
Button S6
PF14
PF5
PG14
PG14
PF46
PG14
LED V10
PF10
PF9
PG10
PG10
PF42
PG10
Function
Full Duplex
Activity
100MB Speed LED
20