101-1019 Rabbit Semiconductor, 101-1019 Datasheet - Page 155

• Manufacturer Part Number: 101-1019
• Description: KIT DEV POWERCORE 3810 INT'L
• Manufacturer: Rabbit Semiconductor
• Series: PowerCore FLEXr
• Type: MPU Moduler

Specifications of 101-1019

• Contents: RabbitCore Module, Dev. Board, AC Adapter, Cable and Dynamic C® CD-Rom
• Processor To Be Evaluated: PowerCore 38xx
• Interface Type: Ethernet
• For Use With/related Products: RCM3810
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

3. Fasten the unit with the four 4-40 screws and washers included with the LCD/keypad
User’s Manual
module. If your panel is thick, use a 4-40 screw that is approximately 3/16" (5 mm)
longer than the thickness of the panel.
Carefully tighten the screws until the gasket is compressed and the plastic bezel face-
plate is touching the panel.
Do not tighten each screw fully before moving on to the next screw. Apply only one or
two turns to each screw in sequence until all are tightened manually as far as they can
be so that the gasket is compressed and the plastic bezel faceplate is touching the panel.
Figure C-10. LCD/Keypad Module Mounted in Panel (rear view)
147