101-0359 Rabbit Semiconductor, 101-0359 Datasheet - Page 33

• Manufacturer Part Number: 101-0359
• Description: KIT DEVELOPMENT BASIC RABBIT2000
• Manufacturer: Rabbit Semiconductor
• Series: RabbitCore 2000r
• Type: MPU Moduler

Specifications of 101-0359

• Rohs Status: RoHS non-compliant
• Contents: RabbitCore Module, Dev. Board, AC Adapter, Cable and Dynamic C® CD-Rom
• Processor To Be Evaluated: Rabbit 2000
• Interface Type: RS-232, RS-485
• For Use With/related Products: RCM2000, RCM2010, RCM2020
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 316-1003

3.3 Switching Between Program Mode and Run Mode
The BL1810 is automatically in Program Mode when the programming cable is attached,
and is automatically in Run Mode when no programming cable is attached. See Figure 5.
3.3.1 Detailed Instructions: Changing from Program Mode to Run Mode
1. Disconnect the programming cable from header J3 of the BL1810.
2. Reset the BL1810. You may do this as explained in Figure 5. Figure 6 shows the loca-
The BL1810 is now ready to operate in the Program Mode.
Getting Started Manual
2. Reset the BL1810. You may do this as
The BL1810 is now ready to operate in the Run
Mode.
3.3.2 Detailed Instructions: Changing
from Run Mode to Program Mode
1. Attach the programming cable to header J3
tion of the RESET button on the Prototyping Board.
explained in Figure 5. Figure 6 shows the
location of the RESET button on the Proto-
typing Board.
on the BL1810.
Figure 5. BL1810 Program Mode and Run Mode Setup
Figure 6. Location of Prototyping Board
Reset Button
29