101-0402 Rabbit Semiconductor, 101-0402 Datasheet - Page 34

no-image

101-0402

Manufacturer Part Number
101-0402
Description
KIT DEV TCP/IP 2000 INTL
Manufacturer
Rabbit Semiconductor
Series
RabbitCore 2000r
Type
MPU Moduler
Datasheet

Specifications of 101-0402

Contents
RabbitCore Module, Dev. Board, Cable and Dynamic C® CD-Rom
For Use With/related Products
RCM2000, RCM2010, RCM2020
Lead Free Status / RoHS Status
Vendor undefined / Vendor undefined
3. Apply Power
When working with the TCP/IP Development Board, the green
program is running and the board is properly connected either to an Ethernet hub or to an
active Ethernet card. The red
30
The following options require more care in address selection and testing actions, as
conflicts with other users, servers and systems can occur:
LAN —
preferably one to which the development PC is already connected. You will need to
obtain IP addressing information from your network administrator.
WAN —
net and other Wide Area Networks, but exceptional care should be used with IP address
settings and all network-related programming and development. We recommend that
development and debugging be done on a local network before connecting a TCP/IP
Development Board to the Internet.
The PC running Dynamic C does not need to be the PC with the Ethernet card.
Plug in the AC adapter. The TCP/IP Development Board is now ready to be used.
TIP: Checking and debugging the initial setup on a micro-LAN is recommended before
NOTE: A hardware RESET is accomplished by unplugging the AC adapter, then plug-
connecting the system to a LAN or WAN.
ging it back in.
Connect the TCP/IP Development Board’s Ethernet port to an existing LAN,
The TCP/IP Development Board is capable of direct connection to the Inter-
ACT
light flashes each time a packet is received.
LNK
TCP/IP Development Kit
light is on when a

Related parts for 101-0402