101-0402 Rabbit Semiconductor, 101-0402 Datasheet - Page 42

• Manufacturer Part Number: 101-0402
• Description: KIT DEV TCP/IP 2000 INTL
• Manufacturer: Rabbit Semiconductor
• Series: RabbitCore 2000r
• Type: MPU Moduler

Specifications of 101-0402

• Contents: RabbitCore Module, Dev. Board, Cable and Dynamic C® CD-Rom
• For Use With/related Products: RCM2000, RCM2010, RCM2020
• Lead Free Status / RoHS Status: Vendor undefined / Vendor undefined

4.7.1 How to Set IP Addresses in the Sample Programs
With the introduction of Dynamic C 7.30 we have taken steps to make it easier to run
many of our sample programs. You will see a
Dynamic C to select your configuration from a list of default configurations. You will
have three choices when you encounter a sample program with the
1. You can replace the
2. You can leave
3. You can create a
There are some other “standard” configurations for
ent features such as DHCP. Their values are documented at the top of the
TCP_CONFIG.LIB
the Dynamic C TCP/IP User’s Manual.
IP Addresses Before Dynamic C 7.30
Most of the sample programs use macros to define the IP address assigned to the board and
the IP address of the gateway, if there is a gateway. Instead of the
will see a
In order to do a direct connection, the following IP addresses can be used for the TCP/IP
Development Board:
In this case, the gateway and nameserver are not used, and are commented out. The IP
address of the board is defined to be
as
38
10.1.1.1
MY_NETMASK
to
to
address of
you can edit the values in the section that directly follows the “General Configuration”
comment in the
directory.
than 100. Instructions for doing this are at the beginning of the
library in the
10.10.6.1
10.10.6.100
#define MY_IP_ADDRESS "10.10.6.170"
#define MY_NETMASK "255.255.255.0"
#define MY_GATEWAY "10.10.6.1"
#define MY_NAMESERVER "10.10.6.1"
#define MY_IP_ADDRESS "10.1.1.2"
#define MY_NETMASK "255.255.255.0"
// #define MY_GATEWAY "10.10.6.1"
// #define MY_NAMESERVER "10.10.6.1"
MY_IP_ADDRESS
10.1.1.2
.
LIB\TCPIP
,
TCPCONFIG
. If you would like to change the default values, for example, to use an IP
MY_GATEWAY
TCP_CONFIG.LIB
library in the
CUSTOM_CONFIG.LIB
, the netmask to
TCPCONFIG
for the TCP/IP Development Board, and
macro and other macros.
directory.
at the usual default of 1, which will set the IP configurations
, and
LIB\TCPIP
macro with individual
10.1.1.2
MY_NAMESERVER
255.255.255.0
library. You will find this library in the
library and use a
TCPCONFIG
directory. More information is available in
. The IP address of your PC can be defined
TCPCONFIG
, and the nameserver and gateway
macros in each program.
MY_IP_ADDRESS
macro. This macro tells
TCPCONFIG
TCPCONFIG
that let you select differ-
10.1.1.1
TCP_CONFIG.LIB
TCP/IP Development Kit
TCPCONFIG
value greater
,
for your PC,
LIB\TCPIP
macro, you
macro.