101-0523 Rabbit Semiconductor, 101-0523 Datasheet - Page 9

• Manufacturer Part Number: 101-0523
• Description: KIT DEV RABBIT3000/RCM3000
• Manufacturer: Rabbit Semiconductor
• Series: RabbitCore 3000r
• Type: MPU Moduler

Specifications of 101-0523

• Rohs Status: RoHS non-compliant
• Contents: RabbitCore Module, Dev. Board, AC Adapter, Cable and Dynamic C® CD-Rom
• Processor To Be Evaluated: RCM3000
• Interface Type: RS-232, Ethernet
• Maximum Operating Temperature: + 70 C
• Minimum Operating Temperature: - 40 C
• Operating Supply Voltage: 3.15 V to 3.45 V
• For Use With/related Products: RCM3000
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 316-1017

Throughout this manual, the term RCM3000 refers to the complete series of RCM3000
RabbitCore modules unless other production models are referred to specifically.
The RCM3000 has a Rabbit 3000 microprocessor operating at 29.4 MHz, static RAM,
flash memory, two clocks (main oscillator and timekeeping), and the circuitry necessary
for reset and management of battery backup of the Rabbit 3000’s internal real-time clock
and the static RAM. Two 34-pin headers bring out the Rabbit 3000 I/O bus lines, parallel
ports, and serial ports.
The RCM3000 receives its +3.3 V power from the customer-supplied motherboard on
which it is mounted. The RabbitCore RCM3000 can interface with all kinds of CMOS-
compatible digital devices through the motherboard.
1.1 RCM3000 Features
• Small size:
• Microprocessor: Rabbit 3000 running at 29.4 MHz
• 52 parallel 5 V tolerant I/O lines: 44 configurable for I/O, 4 fixed inputs, 4 fixed outputs
• Two additional digital inputs, two additional digital outputs
• External reset input
• Alternate I/O bus can be configured for 8 data lines and 6 address lines (shared with
• Ten 8-bit timers (six cascadable) and one 10-bit timer with two match registers
• 256K–512K flash memory, 128K–512K SRAM
• Real-time clock
• Watchdog supervisor
User’s Manual
(47 mm × 67 mm × 22 mm)
parallel I/O lines), I/O read/write
The RCM3000 RabbitCore module is designed to be the heart of
embedded control systems. The RCM3000 features an inte-
grated Ethernet port and provides for LAN and Internet-enabled
systems to be built as easily as serial-communication systems.
1.85" x 2.65"” x 0.86"
1. I
NTRODUCTION
1