101-0679 Rabbit Semiconductor, 101-0679 Datasheet - Page 36

• Manufacturer Part Number: 101-0679
• Description: KIT DEV RABBIT RCM3600 INTL
• Manufacturer: Rabbit Semiconductor
• Series: RabbitCore 3000r
• Type: MPU Moduler

Specifications of 101-0679

• Contents: RabbitCore Module, Dev. Board, Cable and Dynamic C® CD-Rom
• Processor To Be Evaluated: Rabbit 3000
• Interface Type: RS-232
• Maximum Operating Temperature: + 85 C
• Minimum Operating Temperature: - 40 C
• Operating Supply Voltage: 5 V
• For Use With/related Products: RCM3600
• Lead Free Status / RoHS Status: Vendor undefined / Vendor undefined

A program “runs” in either mode, but can only be downloaded and debugged when the
RCM3600 is in the program mode.
Refer to the
gramming port and the programming cable.
4.3.2 Standalone Operation of the RCM3600
The RCM3600 must be programmed via the RCM3600 Prototyping Board or via a similar
arrangement on a customer-supplied board. Once the RCM3600 has been programmed
successfully, remove the programming cable from the programming connector and reset
the RCM3600. The RCM3600 may be reset by cycling the power off/on or by pressing the
RESET
from the Prototyping Board for end-use installation.
30
CAUTION: Power to the Prototyping Board or other boards should be disconnected
button on the Prototyping Board. The RCM3600 module may now be removed
when removing or installing your RCM3600 module to protect against inadvertent
shorts across the pins or damage to the RCM3600 if the pins are not plugged in cor-
rectly. Do not reapply power until you have verified that the RCM3600 module is
plugged in correctly.
Rabbit 3000 Microprocessor User’s Manual
for more information on the pro-
RabbitCore RCM3600