CY3660 Cypress Semiconductor Corp, CY3660 Datasheet - Page 11

• Manufacturer Part Number: CY3660
• Description: KIT DEV ENCORE V AND DVK
• Manufacturer: Cypress Semiconductor Corp
• Series: enCoRer
• Type: MCUr

Specifications of CY3660

• Contents: 4 Boards, Cable, CD, CY3210-MPAdapter, LCD Module, MiniProg Programmer, Power Supplies, Wire Kit
• Lead Free Status / RoHS Status: Not applicable / Not applicable
• For Use With/related Products: Cypress PSOC MCU
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Not applicable / Not applicable

2.1
CY3660-enCoRe V and enCoRe V LV DVK Kit Guide, Doc. # 001-41500 Rev. **
2.
HID Example
The HID_Example demonstrates the basic functionality of a USB HID Mouse. A complete USB HID
Descriptor is provided that allows enumerations on any USB host that supports a HID device. Follow
the steps below.
HID Example Steps
1. Open the HID_Example project in PSoC Designer. The project file is located at
2. Select Build → Generate Configuration Files for ‘HID_Example’ Project.
3. Build the project. Select Build → Build ‘HID_Example’ Project or hit [F7].
4. Program the CY3660 DVK board with the hex file located at C:\CYPRESS\CY3660
5. Wire up Button S1. On the CY3660 DVK board, attach a wire from P0_0 on P7 to S1on P10.
6. Place a jumper on J12.
7. Place a jumper between VDD and VREG on J3.
8. J5 is used to select the fixed 3.3V VREG or Adjustable VREG from 3.66V to 1.63V. In the begin-
9. On a PC, open a simple drawing application (e.g., Paint).
10.
11. Connect the mini-B side of the USB A/Mini-B cable to the CY3660 DVK board.
12. Connect the A side of the USB A/Mini-B cable to the PC.
13. The HID_Example should enumerate on the PC as a USB Mouse HID device.
14. Press the button S1 on the DVK board to toggle the drawing in the drawing application.
C:\CYPRESS\CY3660 DVK\Examples\HID_Example\HID_Example.app. Go to Project
→ Settings → Compiler to choose the applicable compiler.
DVK\Examples\HID_Example\HID_Example\output\. Select the Program → PSoC Pro-
grammer in PSoC Designer, and then follow the
ning, it is suggested to use fixed 3.3V VREG.
On the PC, go to Control Panel
→
Mouse
→
Pointer Options , uncheck “ Enhance Pointer Precision ”.
Programming Steps section on page
7.
11
[+] Feedback