CY3660 Cypress Semiconductor Corp, CY3660 Datasheet - Page 17

no-image

CY3660

Manufacturer Part Number
CY3660
Description
KIT DEV ENCORE V AND DVK
Manufacturer
Cypress Semiconductor Corp
Series
enCoRer
Type
MCUr
Datasheet

Specifications of CY3660

Contents
4 Boards, Cable, CD, CY3210-MPAdapter, LCD Module, MiniProg Programmer, Power Supplies, Wire Kit
Lead Free Status / RoHS Status
Not applicable / Not applicable
For Use With/related Products
Cypress PSOC MCU
Lead Free Status / RoHS Status
Lead free / RoHS Compliant, Not applicable / Not applicable
5.1
CY3660-enCoRe V and enCoRe V LV DVK Kit Guide, Doc. # 001-41500 Rev. **
5.
Wireless USB Example
The WUSB_Example demonstrates the basic functionality of a WirelessUSB HID Keyboard. Two
dev boards with LP radio modules are used for this example. One board is used as a bridge, which
will enumerate on the PC as a bus-powered USB composite device supporting keyboard and
mouse. The other board is used as a keyboard, which will simulate a simple keyboard with three
keys (Num Lock key, Caps Lock key and Scroll Lock key) and three LEDs (Num Lock LED, Caps
Lock LED and Scroll Lock LED). Follow the steps below:
Wireless USB Bridge Steps
1. Open the WUSB_Example bridge project in PSoC Designer. The project file is located at
2. Select Build → Generate Configuration Files for ‘enCoReV_dvk_bridge’ Project.
3. Build the project. Select Build → Build ‘enCoReV_dvk_bridge’ Project or hit [F7].
4. Program the CY3660 DVK board with the hex file located at C:\CYPRESS\CY3660
5. Attach the WirelessUSB LP Radio module to P2.
6. Wire up Button S1 as a bind button. On the CY3660 DVK board, attach a wire from P0_2 on P7
7. Wire up LED1 and LED2. On the CY3660 DVK board, attach wires from P0_0 on P7 to LED1 on
8. Place a jumper on J1 and another jumper on J12.
9. Place a jumper between VDD and VREG on J3.
10. J5 is used to select the fixed 3.3V VREG or Adjustable VREG from 3.66V to 1.63V. In the begin-
11. Connect the mini-B side of the USB A/Mini-B cable to the CY3660 DVK board.
12. Connect the A side of the USB A/Mini-B cable to the PC.
13. The WUSB_Example bridge should enumerate on the PC as a Composite USB device support-
C:\CYPRESS\CY3660 DVK\Examples\WUSB_Example\enCoReV_dvk_bridge
\enCoReV_dvk_bridge.app. Go to Project → Settings → Compiler to choose the applica-
ble compiler.
DVK\Examples\WUSB_Example\enCoReV_dvk_bridge\enCoReV_dvk_bridge\out-
put\. Select the Program → PSoC Programmer in PSoC Designer, and then follow the
gramming Steps section on page
to S1on P10.
P10 and from P0_1 on P7 to LED2 on P10 separately.
ning, it is suggested to use fixed 3.3V VREG.
ing both keyboard and mouse.
7.
Pro-
17
[+] Feedback

Related parts for CY3660