TOOLSTICK330DC Silicon Laboratories Inc, TOOLSTICK330DC Datasheet - Page 2

• Manufacturer Part Number: TOOLSTICK330DC
• Description: DAUGHTER CARD TOOLSTICK F330
• Manufacturer: Silicon Laboratories Inc
• Series: ToolStickr
• Type: MCUr

Specifications of TOOLSTICK330DC

• Contents: Board
• Processor To Be Evaluated: C8051F330
• Interface Type: USB
• Operating Supply Voltage: 2.7 V to 3.6 V
• Accessory Type: Daughter Card Tool Stick
• Development Tool Type: Hardware / Software - Dev Kit (Dev Tool)
• Kit Contents: ToolStick C8051F330 Daughter Card
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• For Use With/related Products: C8051F330
• For Use With: 336-1345 - TOOLSTICK BASE ADAPTER336-1182 - ADAPTER USB DEBUG FOR C8051FXXX
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 336-1346

To olSt ick-F 33 0DC
2. Contents
The ToolStick-F330DC kit contains the following items:
The ToolStick Starter Kit includes the following items:
A ToolStick daughter card requires a ToolStick Base Adapter to communicate with the PC. If the daughter card was
not purchased as part of a Starter Kit, ToolStick Base Adapters can be purchased separately at
www.silabs.com/toolstick.
3. ToolStick Overview
The purpose of the ToolStick is to provide a development and demonstration platform for Silicon Laboratories
microcontrollers and to demonstrate the Silicon Laboratories software tools, including the Integrated Development
Environment (IDE).
The ToolStick development platform consists of two components: the ToolStick Base Adapter and a daughter card.
The ToolStick Base Adapter provides a USB debug interface and data communications path between a Windows
PC and a target microcontroller.
The target microcontroller and application circuitry are located on the daughter card. Some daughter cards, such
as the C8051F330 Daughter Card, are used as general-purpose development platforms for the target
microcontrollers and some are used to demonstrate a specific feature or application.
The C8051F330 Daughter Card includes a pair of LEDs, a potentiometer, a resistor across the C8051F330’s
current DAC output pin, and a small prototyping area which provides access to all of the pins of the device. This
prototyping area can be used to connect additional hardware to the microcontroller and use the daughter card as a
development platform. See Section "10. Board Revision Information‚" on page 14 for information regarding the
prototyping area.
Figure 3 shows the ToolStick C8051F330 Daughter Card and identifies the various components.
2
ToolStick C8051F330 Daughter Card
ToolStick Base Adapter
ToolStick C8051F330 Daughter Card
3-foot USB extension cable
C8051F330
P1.6 Potentiometer
Figure 3. ToolStick C8051F330 Daughter Card
Power LED
Rev. 0.3
P1.3 LED
Full Pin Access