MAXQ2000-KIT Maxim Integrated Products, MAXQ2000-KIT Datasheet - Page 5

• Manufacturer Part Number: MAXQ2000-KIT
• Description: EVAL KIT FOR MAXQ2000
• Manufacturer: Maxim Integrated Products
• Type: MCUr

Specifications of MAXQ2000-KIT

• Contents: Evaluation Board, Interface Board, LCD Daughterboard and software
• For Use With/related Products: MAXQ2000
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

Table 2. Other Jumper and DIP Switch Settings
Note 1: If both SW6 #2 and #3 are closed, P5.2 and P5.3 will be shorted together.
Note 2: If both SW6 #4 and #5 are closed, P7.0 and P7.1 will be shorted together.
JUMPER/
SWITCH
SW1 #1
SW1 #2
SW1 #3
SW1 #4
SW1 #5
SW1 #6
SW1 #7
SW1 #8
SW3 #1
SW3 #2
SW3 #3
SW3 #4
SW3 #5
SW3 #6
SW3 #7
SW3 #8
SW6 #1
SW6 #2
SW6 #3
SW6 #4
SW6 #5
SW6 #6
SW6 #7
SW6 #8
JU10
JU11
JU4
JU5
JU6
JU7
JU8
JU9
HFXIN is driven by the socketed
Kit board is powered from
WHEN OPEN/OFF
J1 supply
No effect
No effect
No effect
No effect
No effect
No effect
No effect
No effect
No effect
No effect
No effect
No effect
No effect
No effect
No effect
No effect
No effect
No effect
No effect
No effect
No effect
No effect
No effect
No effect
No effect
No effect
No effect
No effect
No effect
No effect
crystal
_____________________________________________________________________
HFXIN is connected to HFXADJ
P6.0 is connected to DS1077 SCL
P6.1 is connected to DS1077 SDA
RS-232 DTR/CTS connected (loopback test)
RS-232 RTS/DSR connected (loopback test)
RTS flow control input connected to P5.2
Serial receive connected to P7.1 (RXD0)
DTR flow control input connected to P5.3
DSR flow control output connected to P6.4
Serial transmit connected to P7.0 (TXD0)
CTS flow control output connected to P6.5
DS2433 data line connected to 1-Wire bus
P6.2 (OWOUT) connected to 1-Wire bus
P6.3 (OWIN) connected to 1-Wire bus
HFXADJ is driven by DS1077L output
Kit board will be powered over JTAG
MAX1407 RESET connected to P6.4
HFXADJ is driven by MAX1407 FOUT
MAX1407 CS connected to P5.4 (SSEL)
MAX1407 SCLK connected to P5.6 (SCLK)
MAX1407 DIN connected to P5.5 (MOSI)
MAX1407 DOUT connected to P5.7 (MISO)
MAX1407 INT connected to P6.0
MAX1407 DRDY connected to P6.1
MAX1407 WU1 connected to P6.5
SW4 pulls P5.2 to ground when pressed (Note 1)
SW4 pulls P5.3 to ground when pressed (Note 1)
SW5 pulls P7.0 to ground when pressed (Note 2)
SW5 pulls P7.1 to ground when pressed (Note 2)
EEPROM SCL connected to P6.0
EEPROM SDA connected to P6.1
LED bar graph displays Port 0 logic levels
MAXQ2000 Evaluation Kit
WHEN CLOSED/ON
5