8.12.00 J-LINK ARM-PRO Segger Microcontroller Systems, 8.12.00 J-LINK ARM-PRO Datasheet - Page 150

• Manufacturer Part Number: 8.12.00 J-LINK ARM-PRO
• Description: JTAG EMULATOR USB ETHERNET ARM
• Manufacturer: Segger Microcontroller Systems
• Type: Emulatorr

Specifications of 8.12.00 J-LINK ARM-PRO

• Contents: Emulation Module
• For Use With/related Products: ARM7, ARM9, ARM11, Cortex
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 8.12.00 J-LINK ARM-PRO; 899-1007

150
6.5
6.5.1
J-Link / J-Trace (UM08001)
The J-Link flash download and flash breakpoints features can be used by different
debuggers, such as IAR Embedded Workbench and GDB. The setup for using flash
download and flash breakpoints with external CFI-compliant NOR flash is different
from the setup for internal flash. In this section the setup for CFI-compliant NOR
flash is described.
Using the J-Link flash download and flash breakpoints features with the IAR Embed-
ded Workbench is quite simple:
First, start the debug session and open the J-Link Control Panel. In the tab "Settings"
you will find the location of the settings file.
Close the debug session and open the settings file with a text editor. Add the follow-
ing lines to the file:
[CFI]
CFISize = <FlashSize>
CFIAddr = <FlashAddr>
[GENERAL]
WorkRAMSize = <RAMSize>
WorkRAMAddr = <RAMAddr>
After this the file should look similar to the sample in the following screenshot.
Setup for different debuggers (CFI flash)
IAR Embedded Workbench / Keil MDK
CHAPTER 6
© 2004-2011 SEGGER Microcontroller GmbH & Co. KG
Flash download and flash breakpoints