ST7MDT2-DVP2/US STMicroelectronics, ST7MDT2-DVP2/US Datasheet - Page 70

• Manufacturer Part Number: ST7MDT2-DVP2/US
• Description: KIT DEVELOPMENT ST7
• Manufacturer: STMicroelectronics
• Series: ST7-DVP2r
• Type: Microcontrollerr

Specifications of ST7MDT2-DVP2/US

• Contents: Main Emulation Board (MEB), Target Emulation Board (TEB), Cables, Power Supply and Documentation
• For Use With/related Products: ST72254, ST72215, ST72216, ST72104, ST72225, ST72213, ST72212, ST72101
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Appendix B: Troubleshooting
B.2
5.12
70/82
Changing the parallel port setup on your PC
Under certain circumstances, you may receive the following error message:
This may mean that the setup of the LPT1 or LPT2 port on your PC is not
compatible with the ST7MDT2-DVP2 development board.
To set up the port correctly:
1
2
3
4
5
Running the hardware test
The Hardware Test in the STVD7 for DVP lets you check that your development
board is correctly connected, configured and working. You can test components of
the development board individually, or all at the same time.
If problems occur during debugging (such as bad debugger responses and
unexpected behavior), you should check for hardware problems using the
Hardware Test function, and if any are detected, contact your STMicroelectronics
sales representative (see
You may open the Hardware Test dialog box by:
•
“Connection Error (LPT1/LPT2): Interconnection failure. Verify your
input/output cable.”
Shut down and restart your PC in order to enter the BIOS setup.
Follow the messages displayed on the screen and when prompted, press the
key required to enter the BIOS setup (usually a function key or the ESC key).
Select the parallel ports menu. (This may be listed under I/O ports.)
Change the Mode of the LPT port that you have connected the development
board to (i.e. either LPT1 or LPT2) to one of the following compatible modes,
according to the following table:
Save your changes and exit the BIOS setup.
selecting, from the Main Menu, Emulator>Hardware Test
Operating System
Windows NT4
Windows 95
Windows 98
Product Support
ECP, EPP, Bidirectional or Centronics
ECP, EPP, Bidirectional or Centronics
Compatible Parallel Port Modes
EPP, Bidirectional or Centronics
on page 77).
ST7MDT2-DVP2 User Manual