M3062PT3-CPE-1 Renesas Electronics America, M3062PT3-CPE-1 Datasheet - Page 18

• Manufacturer Part Number: M3062PT3-CPE-1
• Description: DEV COMP EMULATOR M16C/26A,28,29
• Manufacturer: Renesas Electronics America
• Type: In Circuit Debuggerr

Specifications of M3062PT3-CPE-1

• Contents: Compact Emulator, IDE, Assembler and Linker
• For Use With/related Products: M16C/26A, M16C/28, M16C/29
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

M3062PT3-CPE User’s Manual
(5) Power supply for the user system
(6) Host machine
(7) Package converter board such as M30800T-PTC
1.2.1 Names and Functions of each part of the Emulator
Figure 1.2 shows the names of the LEDs on the upper panel of the emulator.
Figure 1.2 Names of the LEDs on the upper panel of the M3062PT3-CPE
(1) System Status LEDs
The system status LEDs indicate the emulator main unit’s operating status etc. Table 1.2 lists the definition of the system status
LEDs.
Table 1.2 Definitions of the system status LEDs
REJ10J1007-0400 Rev.4.00 July 29, 2009
POWER
SAFE
System Status LEDs
LED1 : Emulator Power (POWER)
LED2 : Emulator Status (SAFE)
Target Status LEDs
LED3 : User system power (POWER)
LED4 : Clock oscillation (CLOCK)
LED5 : MCU RESET pin status (RESET)
LED6 : Program Execution (RUN)
Name
This is a power supply for the user system. As this emulator cannot supply the power to the user system, supply the power
to the user system separately from the emulator.
This is a personal computer for controlling the emulator.
This is a package converter board for connecting to an MCU foot pattern on the user system. For details, refer to “2.8
Connecting the User System” (page 33).
Number
LED1
LED2
Orange
Green
Color
P5 P4 P3
512
Status
OFF
OFF
ON
ON
POWER
LED1
POWER
CLOCK
RESET
SAFE
RUN
LED3
LED6
LED2
Power is supplied to the emulator.
Power is not supplied to the emulator.
Emulator system has started normally.
Emulator system has not started normally.
COMPACT EMULATOR
POWER
SAFE
POWER
CLOCK
RESET
RUN
STATUS
SYSTEM
TARGET
STATUS
COMPACT EMULATOR
M3062PT3-CPE
MADE IN JAPAN
Meaning
MADE
POWER USB
5.0V
JP2
EXT
JP1
5.0V
3.3V
INT
J1 : Power connector
J2 : USB interface connector
System reset switch
JP2 : MCU power supply voltage
JP1 : MCU power supply source
(factory-setting: INT)
Selection Jumper
(factory-setting: 5.0V)
selection jumper
Page 16 of 108
1. Outline