HS0AE4XEPI61H Renesas Electronics America, HS0AE4XEPI61H Datasheet - Page 30

• Manufacturer Part Number: HS0AE4XEPI61H
• Description: EMULATOR BASE UNIT AE4
• Manufacturer: Renesas Electronics America
• Type: Smart Cardr

Specifications of HS0AE4XEPI61H

• Contents: E6000 Emulator and CD-ROM
• For Use With/related Products: AE-4X
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

This section explains how to:
To use another interface board, such as a PC card (PCMCIA), refer to the user's manual for that
interface board.
The E6000 emulator communicates with the HDI through the PC interface board, and therefore,
the PC interface board must be inserted into the host computer.
The PC interface board is a memory mapped board, and before inserting it you first need to
reserve a block of memory addresses for use by the board. This ensures that other programs do not
inadvertently use the PC interface hardware.
The allocated memory area must not overlap memory already allocated to other board. If
attempted, the PC interface board and the E6000 emulator product will not operate correctly. At
shipment, the memory area of PC interface board is allocated to the address range from H'D0000
to H'D3FFF.
When using Microsoft
Windows
Interface Board on Windows NT
Note: The PC interface board is not supported in Windows
2.1
The E6000 emulator is supplied in a package containing the following components.
Set up the PC interface board (HS6000EII01H separately purchased).
Set up the E6000 emulator.
Install the HDI software and use it to check correct operation of the entire system.
E6000 emulator
5V and 6A E6000 emulator power supply (AC adapter)
CD-R (HDI, User’s Manual)
User interface cable
External probe 1
External probe 2
Hitachi Debugging Interface for E6000 Setup Guide
®
Package Contents
98. When using Microsoft
®
Windows
Section 2 Setting Up
®
®
4.0.
98, refer to section 2.2, Setting Up the PC Interface Board on
®
Windows NT
®
, refer to section 2.3, Setting Up the PC
®
ME and Windows
®
2000.
7