IE-789860-NS-EM1 Renesas Electronics America, IE-789860-NS-EM1 Datasheet - Page 23

• Manufacturer Part Number: IE-789860-NS-EM1
• Description: BD EMULATOR 78K0S UPD789860
• Manufacturer: Renesas Electronics America

Specifications of IE-789860-NS-EM1

• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

3.3 Setting Power Supply Voltage of Target Interface
system.
supply (5 V). When debugging with a voltage that is the same level as that of the target system, supply the same
voltage as that of the target system to the TP1 terminal pin of the IE-789860-NS-EM1 (the same applies when the
voltage is 5 V). Set the target voltage to between 1.8 and 5.5 V.
Based) User’s Manual (U15185E).
Caution
Remark The V
In the IE system, emulation is possible with a voltage of the same level as the power supply voltage of the target
When the target system is not connected, the IE system automatically operates with the emulator’s internal power
For how to select the operating power supply, refer to the ID78K Series Ver.2.30 or Later Operation (Windows
• Maximum current consumption of TP1
2.0 V: approximately 100 mA to 5.5 V: approximately 300 mA
When connecting target system
When not connecting target system
whether the power supply of the target system is connected in the IE-789860-NS-EM1.
power to the IE-78K0S-NS or IE-78K0S-NS-A.
Before connecting TP1 on the board and the target system power supply voltage, turn off the
DD
Figure 3-2. Connecting TP1 and Target System Power Supply Voltage
Power Supply of Target Interface (LV
pin on the target system is exclusively used to control LED1 (USER VDD) that monitors
Table 3-3. Setting Power Supply of Target Interface
Target system
LED1
IE-789860-NS-EM1
CHAPTER 3
User’s Manual U16499EJ1V0UM
CN1 20GS
Emulation
1.8 to 5.5 V
probe
CC
)
5 V
INSTALLATION
Target system power
V
supply voltage
DD
LV
Integrated Debugger (ID78K0S-NS)
CC
Operating Power Supply Selection
GND
GND
TP1
Internal
Target
21