E401 KIT Atmel, E401 KIT Datasheet - Page 4

• Manufacturer Part Number: E401 KIT
• Description: KIT EVAL FOR QT401-IS QSLIDE
• Manufacturer: Atmel
• Series: Quantumr

Specifications of E401 KIT

• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Other names: 427-1084

2
The E401 PCB can be adhered to plastic, glass, or any other dielectric panel. A white
sample panel is included. Please follow these steps to mount the E401 PCB to the sample
panel:
1
2
3
4
Use normal ESD precautions when working with the E401 !!
Place the user panel face down on a table —
Tape down the edges of the panel to the table so it cannot move while you work with it.
Remove the paper backing from the E401 PCB and adhere it to the rear of the user panel.
Bend the PCB slightly as shown while smoothing it to remove any air bubbles.
Tip: Line up the PCB with the alignment marks on the back of the slider panel. The PCB
must be positioned with the connector on the underside of the QSlide™ logo. The
PCB does allow some flexing, but care must be taken not to bend it too far as this can crack
the SMT components.
Mount the 6 rubber feet as shown to make the E401 mechanically stable in use.
BOARD PREPARATION