EVAL-AD7719EB Analog Devices Inc, EVAL-AD7719EB Datasheet - Page 18

• Manufacturer Part Number: EVAL-AD7719EB
• Description: BOARD EVAL FOR AD7719
• Manufacturer: Analog Devices Inc

Specifications of EVAL-AD7719EB

• Rohs Status: RoHS non-compliant
• Number Of Adc's: 2
• Number Of Bits: 24
• Sampling Rate (per Second): 105
• Data Interface: Serial
• Inputs Per Adc: 3 Single Ended
• Input Range: 2 Vpp
• Power (typ) @ Conditions: 4.85mW @ 105SPS
• Voltage Supply Source: Analog and Digital
• Operating Temperature: -40°C ~ 85°C
• Utilized Ic / Part: AD7719

AD7719
Register Name
Main ADC (DATA0)
Data Register
Aux ADC (DATA1)
Data Register
Main ADC
Offset Register
Main ADC
Gain Register
Aux ADC
Offset Register
Aux ADC
Gain Register
ID Register
Test Registers
Type
Read Only
Read Only
Read/Write
Read/Write
Read/Write
Read/Write
Read
Read/Write
24 Bits
24 Bits
16 Bits
24 Bits
16 Bits
Size
16 Bits or 24 Bits 0x00 0000
16 Bits
8 Bits
Power-On/Reset
Default Value
0x0000
0x80 0000
0x5X XXX5
0x8000
0x59XX
0x0X
0x0000
–18–
Function
Provides the most up-to-date conversion result from
the main ADC. Main ADC data register length
can be programmed to be 16-bit or 24-bit.
Provides the most up-to-date conversion result from
the auxiliary ADC. Aux ADC data register length is
16 bits.
Contains a 24-bit word that is the offset calibration
coefficient for the part. The contents of this register
are used to provide offset correction on the output
from the digital filter. There are three offset registers
on the part and these are associated with input channel
pairs as outlined in the AD0CON register.
Contains a 24-bit word that is the gain calibration
coefficient for the part. The contents of this register
are used to provide gain correction on the output
from the digital filter. There are three Gain registers
on the part, which are associated with input channel
pairs as outlined in the AD0CON register.
Contains a 16-bit word that is the offset calibration
coefficient for the part. The contents of this register
are used to provide offset correction on the output
from the digital filter.
Contains a 16-bit word that is the gain calibration
coefficient for the part. The contents of this register
are used to provide gain correction on the output
from the digital filter.
Contains an 8-bit byte that is the identifier for the part.
Controls the test modes of the part, which are used
when testing the part. The user is advised not to
change the contents of these registers.
REV. A