FS-9062 Digi International, FS-9062 Datasheet - Page 37

• Manufacturer Part Number: FS-9062
• Description: JTAG_BOOSTER FOR ANALOG DEVICES
• Manufacturer: Digi International
• Series: Digi/FS Forthr
• Type: FLASHr

Specifications of FS-9062

• Contents: Programmer and Associated Interface Software
• For Use With/related Products: ADI, ADSP-BF531, 532, 533, 561
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

/DEVICE-BASE=hhhhhh
Here you can specify a flash device starting address. In most cases, where the
flash device is selected with one of the CPUs chip select pins, this parameter is
not needed. But if there is any decoding logic in your hardware, this option will be
needed. Especially, if there are several flash banks connected to one chip select
and a sub decoding logic generates chip selects for these flash banks, this
option can be used to select a specific flash bank.
Default:
Abbreviation:
/OFFSET=hhhhhh
The programming starts at an offset of hhhhhh relative to the start address of the
flash device. If the offset is negative, the offset specifies an address relative to
the end of the flash device. See also option /TOP
Default:
Abbreviation:
/TOP
If the option /TOP is used the option /OFFSET= specifies the address where the
programming ends (plus one) instead of the starting address. This option is very
important for Intel CPU architectures, because target execution always starts at
the top of the address space.
/FILE-OFFSET=hhhhhh
If FILE-OFFSET is specified, the first hhhhhh bytes of the file are skipped and
not programmed to target.
Default:
Abbreviation:
/LENGTH=hhhhhh
The number of programmed bytes may be limited to LENGTH. If no LENGTH is
specified the whole file is programmed.
Default:
Abbreviation:
/NODUMP
In case of a verify error the contents of the flash memory is written to a file with
the extension .DMP. With /NODUMP you can suppress this feature.
1
JTAG_ADSP-BLACKFINa.doc
hhhhhh=number base is hex
/DEVICE-BASE=0
/DB=
/OFFSET=0
/O=
/FILE-OFFSET=0
/FO=
/LENGTH=4000000 (64 MByte)
/L=
1
JTAG-Booster for Analog Devices Blackfin
37