ST92F150-EPB/US STMicroelectronics, ST92F150-EPB/US Datasheet - Page 12

• Manufacturer Part Number: ST92F150-EPB/US
• Description: BOARD PROGRAM FOR ST92F150 MCU
• Manufacturer: STMicroelectronics

Specifications of ST92F150-EPB/US

• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Other names: 497-3100

3 - How to Program
Note:
12/24
5
6
You can also select a microcontroller type from the drop-down list in the toolbar.
7
8
9
10 In the list of files, click the file holding the code you want to program.
11 Click OK. When the file is loaded, the Information window (the black-
Select your
target device
with the ISP
option if you
wish to
program your
target device
using In Situ
Programming
(ISP)
The list box shown below appears.
From the list shown in the Select Device tab of the ST Visual Programmer
Configuration window, select the device to be programmed.
Click Apply to save your changes without closing the dialog box, or OK to save
your changes and close the dialog box.
In STVP9’s main window there are a number of tabs with one or more of the
following names (depending on the device selected): FLASH, OSD, EPROM,
EEPROM, Option Bytes or Device Information.
Select one of the memory type tabs (i.e. FLASH, OSD, EPROM, EEPROM or
Option Bytes).
From the main menu, select File>Open and type the name of, or browse to, the
file you want to load.
background text window at the bottom of the STVP9 application window)
displays file checksum and global device checksum. Global device checksum
represents checksum calculated without reserved area.
ST9 EPB User Manual