HS2339KCI01H Renesas Electronics America, HS2339KCI01H Datasheet - Page 27

• Manufacturer Part Number: HS2339KCI01H
• Description: ON CHIP DEBUG EMULATOR
• Manufacturer: Renesas Electronics America

Specifications of HS2339KCI01H

• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

Section 1 Overview
The E10A emulator (hereafter referred to as the emulator) is a software and hardware
development support tool for application systems using the microprocessor developed by Hitachi,
Ltd.
The PCMCIA card emulator or PCI card emulator (hereafter referred to as the card emulator),
which is the main unit of the emulator, is connected, through the Hitachi-UDI (user debug
*
interface) port
, to the user system. The user system can be debugged under the conditions similar
to the actual application conditions. The emulator enables debugging anywhere indoors or out.
The host computer for controlling the emulator must be an IBM PC compatible machine with a
PCMCIA type II or PCI slot.
Figures 1.1 and 1.2 show the system configuration using the emulator.
Note: The Hitachi-UDI is an interface compatible with the Joint Test Action Group
(JTAG) specifications.
Host computer (PC with PCMCIA TYPE II slot)
PCMCIA card emulator
User system interface cable
PC
PC
Card
H8S/xxxx
Insert into the PCMCIA TYPE II slot
Connect to the Hitachi-UDI port connector
User system
Figure 1.1 System Configuration with the Emulator (PCMCIA Card Emulator Used)
1