HS7615KCM01H Renesas Electronics America, HS7615KCM01H Datasheet - Page 113

• Manufacturer Part Number: HS7615KCM01H
• Description: ON CHIP DEBUG EMULATOR
• Manufacturer: Renesas Electronics America

Specifications of HS7615KCM01H

• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

3.22 Download Function to the Flash Memory Area
Note: The write/erase module must be prepared by users.
Table 3.6 Module Interface
Module Name
Write module
Erase module
Note: The (L) means the longword size.
Note: Write module:
The E10A emulator enables downloading to the flash memory area. This function requires a
program for writing the flash memory (hereinafter referred to as a write module), a program
for erasing the flash memory (hereinafter referred to as an erase module), and the RAM area
for downloading and executing these modules.
Interface with write/erase module and E10A emulator firmware
The write/erase module is branched from the E10A emulator firmware. To branch from the
E10A emulator firmware to the write/erase module or to return from the write/erase module to
the E10A emulator firmware, the following conditions must be observed:
Describe all the write/erase modules with the assembly language.
Guarantee all the general/control register values before and after calling the write/erase
module.
Return the write/erase module to the calling source after processing.
The module interface must be as follows to pass correctly the information that is required for
flash memory accessing.
The write data for the access size is set to the R6 register. When the access size is
word or byte, 0 is set to the upper bit of the R6 register.
Argument
R4(L): Write address
R7(L): Verify option
0 = no verify,
1 = verify
R5(L): Access size
0x4220 = byte,
0x5720 = word,
0x4C20 = longword
R6(L): Write data
R4(L): Access size
0x4220 = byte,
0x5720 = word,
0x4C20 = longword
R0(L): End code
Normal end = 0,
Abnormal end = other than 0,
Verify error = BT
None
Return Value
89